Smart Remote - Huawei P40 Pro+ User Manual

3
When your phone identifies the object, a frame will appear. After the frame overlaps with
the object, touch
4
Your phone will automatically display the result.
Drag the end point to fine-tune the measurement result.
Measure Volume
Currently, only the volume of cubes can be measured.
•
Make sure the object is not placed against a wall. Ensure there is a distance of 1–1.5 m
•
(3.3–5 ft.) between your phone and the object.
On the AR Measure screen, touch Volume. Both automatic and manual measurements are
allowed.
Automatic Volume Measurement
1
Ensure that Auto is turned on. Frame the object in the viewfinder and slowly move your
phone to locate the plane.
2
When your phone identifies the object and displays a frame, touch
3
Your phone will automatically display the result.
Drag the tips to fine-tune the measurement result.
Manual Volume Measurement
1
Turn off Auto. Frame the object in the viewfinder and slowly move your phone to locate
the plane.
2
Point at the tip of the object's bottom edge and touch
point.
3
Move your phone slowly so that
reaches the end of the edge, touch
4
Move your phone to create a frame for the object's bottom. When the frame overlaps with
the bottom plane, touch
5
Move your phone to create a frame for the whole object. After the frame overlaps with
the object, touch
6
Your phone will automatically display the result.
Drag the tips to fine-tune the measurement result.

Smart Remote

.
travels along the long edge of the object. When it
.
.
.
Smart Features
.
to mark the starting
50