Advertisement

AX-9341 - Digital Thermometer

1. Function

- ON/OFF
- H/T
- IP 67
- ONE HOUR AUTO SHUT OFF

2. Feature

- Stainless steel sensor probe
- 1 second normal temperature sensing time
- Low battery indicator

3. Specification

- Measurement range
-50°C - +150°C or -58°F - +302°F
- Resolution
0,1° for -19,9° - +199,9°, otherwise 1°
- Accuracy
±1°C in the range of -20°C - +150°C, otherwise more than ±2°C; ±1,8°F in the range of -4°F - +302°F,
otherwise more than ±4°F
- Ambient temperature for plastic case
0°C - +50°C or +32°F - +122°F
- Battery
1x1,5 volts "393" size or equivalent

4. Installation

- Unpack the thermometer with care
- Open the battery door and install battery into the battery compartment. Then close the battery door.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AX-9341 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Axio MET AX-9341

  • Page 1 AX-9341 - Digital Thermometer 1. Function - ON/OFF - H/T - IP 67 - ONE HOUR AUTO SHUT OFF 2. Feature - Stainless steel sensor probe - 1 second normal temperature sensing time - Low battery indicator 3. Specification - Measurement range -50°C - +150°C or -58°F - +302°F...
  • Page 2 - Untie the sensor wire, the thermometer is now ready for use. - Replace a battery when the low battery indicator appears on the display. 5. Operation - ON/OFF - press ”ON/OFF” button for on/off switching. - H/T - press ”H/T” button to retain reading for recording. HOLD sign flashes on the display to indicate the holding position.
  • Page 3 7. Changing battery...

Table of Contents