Portek Logmaster Assembly & User's Manual page 2

Read and understand these
safety instructions before use
Get the right safety equipment - don't take chances
Head, eye and hearing protection
Face protection visor to EN1731
or Safety Glasses/Goggles to glasses to EN166
Hearing protection to EN 352-1: 2002
Helmet to EN 397
Foot protection
Steel Toecap Boots to EN EN345-2
distinctively marked as suitable for
chainsaw use, to EN381-3[1]
Use ALL
take chances.
DO NOT RUSH
ENSURE ALL THE FIXINGS ARE TIGHT
chainsaw vice before work and regularly whilst operating as fixings can become
loose due to the vibration of the chainsaw
CHECK CHAINBAR GUARD DOES NOT TOUCH THE CHAIN
Logmaster if the chain guard is touching the chain. Adjust immediately.
ENSURE LOGMASTER IS STABLE
uneven or very soft ground.
IF IN DOUBT, DO NOT USE
using your chainsaw with the Logmaster, get expert advice - don't take chances.
www.portek.co.uk
safety equipment as recommended by your chainsaw manufacturer. Don't
- take your time and work at a reasonable pace
- DO NOT use if the Logmaster is unsteady due to
- if you are not sure about the chainsaw or any aspects of
Body and Limb protection
Chainsaw protective jacket to EN381-11
Cut protection trousers type A minimum
to EN381-5
Hand protection
Chainsaw Gloves to EN381-7
- check the tightness of the bolts and also
- DO NOT continue to use the
01234 88 94 54