Using The Control Panel Lock Feature; Using The Pc Settings Feature - Toshiba Regza 42XV545U Owner's Manual

52XV545U_EN.book Page 57 Monday, August 4, 2008 10:54 AM
To deactivate the Input Lock once the GameTimer
has activated it:
Set the Input Lock to Off (- "Using the input lock
feature" as described above).
Note:
• A message will appear when 10 minutes, 3 minutes, and 1
minute remain on the GameTimer.
• If the TV loses power with time remaining on the GameTimer,
when power is restored the TV will enter Input Lock mode
(as if the GameTimer had been activated), and you will have
to deactivate the Input Lock (as described above).

Using the control panel lock feature

You can lock the control panel to prevent your settings
from being changed accidentally (by children, for
example). When the control panel lock is On, none of the
controls on the TV control panel will operate except
POWER.
To lock the control panel:
1
From the Locks menu, press b to display the PIN
code entering screen.
Enter your four-digit PIN code and press T.
2
3
Press b to highlight Control Panel Lock.
Press c and B b to highlight On and press T. When
4
the control panel is locked and any button on the
control panel (except POWER) is pressed, the
message "Not Available" appears.
To unlock the control panel:
Highlight Off in step 4 above, or press and hold the
VOLUME – button on the TV control panel for about 10
seconds until the volume icon appears.
Chapter 6: Using the TV's features

Using the PC settings feature

You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you
can use the PC Settings feature to make adjustments to
the image.
If the edges of the picture are cut off, readjust the
Horizontal Position and Vertical Position. If the
picture is affected by interference, readjust the Clock
Phase and Sampling Clock.
To adjust the PC settings:
1
Select PC input mode (- "Selecting the video input
source to view" page 42).
2
From the Setup menu, highlight PC Settings and
press T.
Note: If a PC is not connected or there is no PC input
signal, this feature will be grayed out in the Setup menu.
3
Press B or b to highlight the item you want to
adjust.
4
Press C or c to make the appropriate adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
Mode
Horizontal
Position
Vertical
Position
Clock Phase
Sampling
Clock
* The default settings and /or adjustment range vary depending on
the input signal format.
Description
Moves the picture left/right.
The adjustment range is within ±10 from
center.*
Moves the picture up/down.
The adjustment range is within ±10 from
center.*
Helps to reduce noise and sharpen the
picture.
The adjustment range is within ±32 from
center.*
Helps to reduce noise and minimize
periodic vertical stripes on the screen.
The adjustment range is within ±5 from
center.*
XV545U (E/F) Web 177.8:228.6
57