Removing The Pedestal Stand - Toshiba 32RV525RZ Owner's Manual

6) VESA Mounting Pattern
TV Size Hole Pattern(HxV)
32" 200x200
37" 200x200
40" 200x200 mm
46" 400x200 mm

Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove the four screws shown in the right diagram.
This will allow removal of the pedestal stand.
3) Once you have removed all four screws, holding the
pedestal stand in place, remove the pedestal stand
from the TV.
32" TV
VESA Mounting Pattern
Four screws
37" TV
VESA Mounting Pattern
Four screws
6
Screw Size
mm M6
mm M6
M6
M8
(unit in mm)
Hook
Sturdy strap
(as short as possible)
Hook
Sturdy strap
(as short as possible)
40" TV
VESA Mounting Pattern
Four screws
46" TV
VESA Mounting Pattern
Four screws
CAUTION: Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of
the unit. To secure the TV, use a sturdy strap from
the hook(s) on the rear of the TV to a wall stud, pillar,
or other immovable structure. Make sure the strap is
tight, secure, and parallel to the floor.
Hook
Sturdy strap
(as short as possible)
Hook
Sturdy strap
(as short as possible)