Rocklink; Viewing The Data - Proceq RockSchmidt Operating Instructions Manual

Standard Warranty and Extended Warranty
The standard warranty covers the electronic portion of the instrument for 24 months and the me-
chanical portion of the instrument for 6 months.
An extended warranty for one, two or three years for the electronic portion of the instrument may be
purchased up to 90 days of date of purchase.

9. RockLink

Starting RockLink
Locate the file "RockLink_Setup" on your computer or on
the CD and double-click on it. Follow the instructions you
see on the screen.
Application settings
The menu item "File – Application settings" allows the user to select the language and the date and
time format to be used.
Connecting to the RockSchmidt
Connect your RockSchmidt to a USB port, then click on the icon to bring up the fol-
lowing window:
The USB driver installs a virtual com port which is used to communicate with the RockSchmidt.
When a RockSchmidt has been found you will see another window. Click on the "Finish" button to
establish the connection.
18
Leave the settings as default or if
you know the COM port you can en-
ter it manually.
Click on "Next >"
© 2017 Proceq SA

9.1 Viewing the Data

The data stored on your RockSchmidt will be displayed on the screen:
The test series is identified by the "Impact counter" value.
There is a "Name" column where the user can define a name to the series.
Right click in the columns to change settings defined at the time of the measurement.
Click on the double arrow icon in the impact counter column to see more details:
NOTE! The user may also add a comment to the measurement series.
To do so, click on "Add".
NOTE! The user may alter the order in which the measurements are shown. Click on
"measurement order" to switch to "ordered by value" and vice versa.
Summary window
In addition to the "Series" view described above, RockLink also provides the user with a "Summary"
window. This is useful for comparing rebound numbers collected over a wide area.
Click on the respective tab to switch between views.
NOTE! To include or exclude a series from the summary, click on the summary symbol in
the impact counter column. This symbol is either "black" or "greyed out", which shows
whether or not the particular series is included in the summary. In order to make a sum-
mary, all selected series must have the same unit. The summary view can be adjusted in
a similar way to the detailed view of the series.
© 2017 Proceq SA 19