Leader Light PRO WASH VARIO OPTIC Series User Manual

LL PRO WASH VARIO OPTIC
Without optic: LL37 104 LL37 105 LL37 106 LL37 107
With optic: LL37 109 LL37 110 LL37 114 LL37 115
COMPLIMENTS ON yOUR PURCHASE!
All dimensions are in millimeters
120
600
1200
following items are included:
1. LL PRO WASH 600/1200 without optic
- LL PRO WASH 600/1200 without optic with adjustable bracket
- PowerCon type "A" + "B"
- User manual
2. LL PRO WASH 600 with optic
- LL PRO WASH 600 without optic with adjustable bracket
- LL VARIO OPTIC WASH 600
- PowerCon type "A" + "B"
- User manual
3. LL PRO WASH 1200 with optic
- LL PRO WASH 1200 without optic with adjustable bracket
- LL VARIO OPTIC 400 WASH 1200
- PowerCon type "A" + "B"
- User manual
Additional items needed:
- Data cables with XLR 5pin Female/Male
- Controller compatible with DMX
- Mounting accessories and Vario Optics as necessary
Surface mounting:
- Screws and washers 6xM12, 2xM8
Content:
01 SAfETy INfORMATION
01.1 Risk of eyes damage
01.2 Protection from electric shock
01.3 Fire prevention
02 PROdUCT SPECIfICATION
02.1 Technical Specification
02.2 Back panel
03 INSTALLATION
03.1 Unpacking
03.2 Physical installation
03.3 Connecting to AC power
03.4 Control data connecting
03.5 DMX channels
04 PERNAMENT USE LIMITATIONS
05 MAINTENANCE
©MMX - Leader Light – All right reserved
01 SAfETy INfORMATION
Leader Light s.r.o.
M.Gorkeho 33
SK-052 01 Spisska Nova Ves
Slovakia
WARNING!!!
www.leaderlight.eu
Carefully read before installing, powering or servicing.
USER MANUAL
Nothing to do if anything misunderstand! Installation can be done only
by a qualified professional in accordance with relevant local codes.
01.1 Risk of eyes damage
- Do not look directly into LED lamps.
- Do not look into light beam from a distance of less than 40 cm (16 inches)!
01.2 Protection from electric shock
- Shut down power before installation or maintenance.
- Luminaries and recommended AC power supply must be installed by a qualified
80
professional in accordance with relevant local codes. Only acceptable source of AC power
170
and frequency that complies with local building and electrical codes to use.
- Do not use or do not connect the products if the power cable, power plug or fixtures are any
way damaged, wet, or if they are overheating.
- Do not modify, alter, or attempt to service the LeaderLight appliance. Doing so will void the
warranty.
- Before removing or installing any cover or part of appliance disconnect it from AC power.
- Appliance always connect to earth (eltech.).
01.3 fire prevention
- Follow all safety consideration.
- Thermostatic switches or fuses never to bypass.
- Device never shield. Around the axis of the fitting (180°) must be maintained space for
cooling. Minimum distance from the surrounding objects must be 100mm (4 in.) (figure 1.1).
- LEDs never direct cover with filters or other materials.
1 pc.
- Allowing max. ambient temperature is 40°C (104°F).
1 pc.
- Luminaries never use without mounting brackets. The housing never install directly to the
1 pc. surface.
1 pc.
02 PROdUCT SPECIfICATION
1 pc.
1 pc. 02.1 Technical Specification
1 pc.
Lamp type:
1 pc.
Lifetime:
3 pcs.
Vario Optic:
1 pc.
Control data Input:
1 pc.
Input power:
1 pc.
Power connection:
1 pc.
Net weight:
Ambient temp. (Ta):
Cooling:
Materials and finish:
Installation:
*
P4: R-Red,
- One module RGBAW (4pcs White, 4pcs Green, 4pcs Blue, 5pcs Red, 5pcs Amber) => total 3/6 modules
- One module AW (12pcs White, 10pcs Amber) => total 3/6 modules
ENVIRONMENT
Do not throw away the appliance with the normal household waste at the end of
its life, but hand it in at an official collection point for recycling. By doing this, you
help to preserve the environment.
66/132xRGBAW/AW P4 *
Long 50 000 hrs 70% degradation
10°, 25°, 40°, EL (Eliptical 15°x90°) and AS(Asymetrical)
DMX 512 In/Out with XLR 5PIN
max. 102W/203W
100-260V AC 50-60Hz In/Out PowerCon
5,5kg/11kg
IP: IP20
Maximum 40°C
Conventional
Housing: powder-painted anodized aluminium in black
(other colours on request)
Cover: clear or frosted PMMA
Surface mounting
G-Green, B-Blue, A-Amber, W-White (6300°K)
Edition: A - 2010
02.2 Back panel
DMX Out DMX In Power In
Control LEDs
XLR-5pin XLR-5pin PowerCon
» Rotating DIP address 000÷511
Dip options "100" "10" "1"
Control LEds Indication
LEd INdICATION STATUS
POWER (Green) blinking – 2Hz OK - inside fixture is everything correct
DATA (Yellow) light off NO DMX512 signal
DATA (Yellow) blinking – 4Hz OK- income correct DMX512 signal
DATA (Yellow) fast blinking NON correct digital signal
POWER (Green)
alternate blinking Autotest function
DATA (Yellow)
03 INSTALLATION
03.1 Unpacking
- Unpack carefully.
- This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be claim
immediately by the transport company. Photo pictures as evidence are valuable for
future claim.
03.2 Physical installation
- Loading capacity of bearing area has to be at least 10 times the weight of all device
clusters (luminaries, clamps, cables, ...).
- Hairbreadth from combustible materials is 0,5m.
- Before physical installation insert the optic modul on top of luminary. The optic
installation is easy and fast by 2 screws (Figure Nr. 1.2).
03.3 Connecting to AC power
- To tackle all Safety Information- 01!
- For protection from electric shock, the device must be grounded (earthed)!
- It is not necessary to open the fixture before power supply.
- Power supply is solved simple with Neutrik PowerCon connectors.
- The fixture is equipped with auto-switching power supply that automatically adjusts to
any 50-60Hz AC power source from 100-260V.
- Cord plug connections:
Symbol Pin Wire Colour
L live brown
N neutral blue
ground (earth) yellow/green
03.4 Control data connecting
- Control data cable length is specified by Norm IEC929 Annex E4.
- It is not necessary to open the fixture before connecting of DMX512 control signal.
Interconnections are realized by Neutrik XLR 5pin IN/Out connectors.
- Pin connections:
Pin 1 – ground
Pin 2 – signal negative
Pin 3 – signal positive
If you have any question please, contact support@leaderlight.sk
Power Out
PowerCon
POWER DATA
Screw (US)
yellow or brass
silver
green