Advertisement
ASSEMBLING THE SM3
Installing and soldering six parts on a small PC board doesn't seem like much of a task, but there is still the
possibility for error, so follow our step-by-step directions and you'll be "wailing" real soon!
When we say to install a part, we mean:
• Carefully select the right part and insert it in the PC board.
• Gently press it fully down to the board surface.
• Solder the lead wires - and don't be afraid of using too much heat for a good solid
• Clip or trim off the excess component lead wire.
SM3 parts layout
SM3—3
connection.
Advertisement
