Advertisement
Advertisement
Table of Contents
Related Manuals for OYPLA Home 4055
Summary of Contents for OYPLA Home 4055
- Page 1 User Manual Dual Monitor Mount USER MANUAL Model No: 4055...
- Page 2 • Do not discard any of the packaging until you have checked that you have all the parts and fittings required. • If the product is damaged or has any defects, please contact cservice@oypla.com USER MANUAL Model No: 4055...
- Page 3 Parts List: If you are missing any of the below parts please contact cservice@oypla.com Please be aware that you will be referring to this parts list throughout the assembly process. USER MANUAL Model No: 4055 USER MANUAL Model No: 4055...
- Page 4 Clamp Support (part 7) are aligned with the holes on the Clamp Brace (part 5). Secure these two together by pushing two 10MM Screws (part 8) through the aligned holes. Please see figure 2 below. fter you have completed both steps the finished build should look the same as figure 3. USER MANUAL Model No: 4055...
- Page 5 (part 4). To adjust the height of the Primary Arm Joint (part 10), simply loosen the Bolt (part 11) and slide the Primary Arm Joint (part 10) up and down depending on your needs. Please see images below. USER MANUAL Model No: 4055...
- Page 6 Do not tighten any of the nuts until the unit is completely assembled, then finish by tightening all nuts. All of the nuts must be tightened before use. Please see the image below. USER MANUAL Model No: 4055...
- Page 7 Moveable Mount Arm (part 14). This may require some force due to how secure the screw will be. After all previous steps are completed, push the Topper (part 16) into the Support Beam (part 1). Please see figure 2 USER MANUAL Model No: 4055...
- Page 8 Ensure fully assembled and secure before use. Please retain a copy of all instructions for future consultation. USER MANUAL Model No: 4055...
Need help?
Do you have a question about the 4055 and is the answer not in the manual?
Questions and answers