1. Manuals
  2. Brands
  3. Graham-Patten Manuals
  4. Music Mixer
  5. D/ESAM 820
  6. Alignment manual

Graham-Patten D/ESAM 820 Alignment Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Alignment

Fader Alignment

Changing Input/Output Levels

D/ESAM 820 User's Guide
Use the following procedure to align the Control Panel faders such that electrical
fader position matches physical fader position:
1.
Ensure that monitor levels for all channels are turned down.
2.
Take all faders and physically move them to their uppermost limit (+6
dB position). Leave each fader there.
3.
To align faders, press LOCK/UNLK, hold it down and press FADER
SPLIT. Electrical position now matches the physical scale printed on
the panel. This completes the fader alignment process.
The following topics are discussed in this section:
•
•
Aes Input Module — installation and jumper settings
•
•
•
•
Alignment • Error! Main Document Only.-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D/ESAM 820 and is the answer not in the manual?

Questions and answers

Related Manuals for Graham-Patten D/ESAM 820

Summary of Contents for Graham-Patten D/ESAM 820

  • Page 1 Analog Input Alignment, Assy. #04-0160-01 • AES Input Module — installation and jumper settings • Audio Output Module • Meter Output Adjustments • Program Output Adjustments • Monitor Output Adjustments Alignment • Error! Main Document Only.-1 D/ESAM 820 User’s Guide...
  • Page 2 The Analog Input Module has been factory aligned. Adjustments should not be required unless reference level or the digital pad has been changed for particular inputs or components have been replaced. Error! Main Document Only.-2 • Alignment D/ESAM 820 User’s Guide...
  • Page 3 0VU (-8PPM) on the Meter Panel. The internal tone generator can be used for alignment. In Chapter 5, refer to the NOTE “Alignment - Menu 6.1” section for setting tone generator options. Alignment • Error! Main Document Only.-3 D/ESAM 820 User’s Guide...
  • Page 4 48kHz synchronized (like CD’s or DAT machines) to be connected to the D/ESAM in the digital domain. “Synchronized” means that the device generating the AES signals should be NOTE referenced to the same video reference as D/ESAM. Error! Main Document Only.-4 • Alignment D/ESAM 820 User’s Guide...
  • Page 5 • 04-0164-00 — All eight channels are sample rate converted. Installation When setting the D/ESAM 820 Series module definition, 04-0167-XX is compatible with any of the previous versions of the digital input modules (04-0148-00 or 04-0141-00). Jumper Settings The module has two sets of jumpers for each input.
  • Page 6 NOTE J480 is used for configuration: • Data mode 1 configures the module for the D/ESAM 820. • Data mode 0 configures the module for the D/ESAM 800. Refer to the silk screen on the module itself for jumper J480 positions and data mode indications.
  • Page 7 The location of the Program trims are indicated in the figure above. The internal tone generator can be used for alignment. In Chapter 5, see the NOTE “Alignment - Menu 6.1” section for setting tone generator options. Alignment • Error! Main Document Only.-7 D/ESAM 820 User’s Guide...
  • Page 8 The location of the Monitor trims are indicated in the figure above. The internal tone generator can be used for alignment. In Chapter 5, see the NOTE “Alignment - Menu 6.1” section for setting tone generator options. Error! Main Document Only.-8 • Alignment D/ESAM 820 User’s Guide...

Table of Contents