Table of Contents
Advertisement
Available languages
Available languages
1
2
3
4
1
5
Knife Blade
11
11
12
13
14
15
Follow the instructions under 'to use your food
processor'.
21
22
23
24
21
25
Hints and Tips
31
31
32
33
34
35
For coarser textures use the pulse control.
l
Cut food such as meat, bread, vegetables into
l
cubes approximately 2cm.
Biscuits should be broken into pieces and added
l
down the feed tube whilst the appliance is
running.
Take care not to over-process.
l
When making pastry use fat straight from the
2
3
4
5
6
l
fridge cut into 2cm cubes.
Dough Tool
12
13
14
15
16
Use for yeasted dough mixes.
22
23
24
25
26
Hints and Tips
Do not process for longer than 60 seconds.
l
32
33
34
35
36
Place the dry ingredients in the bowl and add the
l
liquid down the feed tube whilst the appliance
is running. Process until a smooth elastic ball of
dough is formed.
Re-knead by hand only. Re-kneading in the bowl
l
is not recommended as it may cause the processor
3
4
5
6
7
to become unstable.
Emulsifying Tool
13
14
15
16
17
Follow the instructions under 'to use your food
processor'.
23
24
25
26
27
Use for light mixtures only e.g. cream, mayonnaise.
33
34
35
36
37
Hints and Tips
4
5
5
6
6
7
7
8
Ensure the bowl and tool are clean and free from
8
9
l
grease before use.
15
4
15
16
16
17
17
18
18
19
–
To Use The Cutting Discs
1
Fit the drive shaft and bowl onto the power unit.
24
25
25
26
26
27
27
28
28
29
2
Holding by the centre grip, place the disc onto the
drive shaft with the appropriate side uppermost.
3
Fit the lid.
34
35
35
36
36
37
37
38
38
39
4
Put the food in the feed tube.
5
Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
Hints and Tips
Use fresh ingredients
l
Do not cut food too small. Fill the width of the feed
l
tube fairly full.This prevents the food from slipping
sideways during processing.
When slicing or grating: food placed upright comes
l
out shorter than food placed horizontally.
There will always be a small amount of waste on
l
the disc or in the bowl after processing.
5722000053 Iss 1 Braun FP3131_FP3132 Multilingual.B5.indd 5
2
6
3
7
4
8
5
9
6
10
12
13
14
15
16
16
17
18
19
20
22
26
23
27
24
28
25
29
26
30
32
33
34
35
36
36
37
38
39
40
7
8
9
10
17
18
19
20
27
28
29
30
37
38
39
40
8
9
10
18
19
20
28
29
30
38
39
40
10
9
10
Discs
20
19
20
29
30
30
39
40
40
7
8
9
10
Mini chopper/mill
17
18
19
20
a
Jar
b
Sealing ring
27
28
29
30
c
Blade assembly
1
Put the ingredients into the jar.
37
38
39
40
2
Fit the sealing ring into the blade assembly.
3
Turn the blade assembly upside down. Lower it
into the jar, blades down.
4
Screw the blade assembly onto the jar until finger
tight. Refer to the graphics on the underside of the
blade assembly as follows:
- Unlocked position
- Locked position
5
Place the mill onto the power unit, align the
on the mill with the
clockwise
to lock
6
Select Maximum speed or use the pulse (P).
Hints and Tips
Baby food/purée - allow cooked food to cool down
l
to room temperature before processing in the mill.
For best results the main bowl is recommended
l
when chopping herbs.
Care and Cleaning
Always switch off and unplug before cleaning.
l
Handle the blender/mill blade assembly, knife
l
blade and discs with care - they are extremely
sharp.
Some foods may discolour the plastic. This is
l
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
Wipe with a damp cloth, then dry. Ensure that the
l
interlock area is clear of food debris.
Do not immerse the power unit in water.
l
Store excess cord in the storage area at the back
l
of the power unit
Refer to illustration
instruction of the tools and attachments
5
(if supplied)
on the power unit and turn
.
1
2
3
11
12
13
.
bl
for cleaning
21
22
23
31
32
33
4
5
6
7
14
15
16
17
24
25
26
27
34
35
36
37
27/11/2019 08:05
Advertisement
Table of Contents
