Adjusting Cutting Height - Grizzly T31999 Owner's Manual

Adjusting Cutting
Height
The fence can be adjusted to a height
of 0–40mm. Cutting height depends on
your workpiece thickness. Set the cut-
ting height to half the thickness of your
workpiece for the strongest joint.
To adjust cutting height:
1. Set faceplate angle to 90° (see
Adjusting Cutting Angle on Page 16).
2. Loosen fence lock knob and move
fence up or down on faceplate until
arrow mark on angle scale aligns with
desired height on fence height scale
(see Figure 13).
Model T31999 (Mfd. Since 02/20)
Fence Arrow
Lock Mark
Knob
Fence Height Scale
Figure 13. Location of cutting height
adjustment components.
3. Tighten fence lock knob once desired
height is reached.
-17
-