SolarMate Secure Professional Plus Instruction Manual

SolarMate Secure Professional Plus
INSTRUCTION MANUAL

GENERAL

Thank you for purchasing the SolarMate Secure professional Plus
motion activated security floodlight. It was made to provide many
years of service using environmentally friendly solar power.

BOX CONTENTS

1 x SolarMate Secure Professional Plus 48 LED Light and Motion Detector
What's Inside the Package
1 x Solar Panel
1 x Wall Fixings Pack
1 x User Manual
208mm
208mm
• 48 LED matrix light w/motion detector
• Solar charger board
100mm
• User Manual
100mm
177mm Note:Packaging items
177mm
LED
SENSOR LIGHT
Correct moving orientation
Note:Please purchase according to demand.
8X

FEATURES

4x30 Screw
8X
• Uses only solar power.
4x30 Screw
• Can be installed anywhere as long as the solar panel can see the sky.
• Uses 48 individual white high luminance LEDs.
Introduction
• Both the solar panel and light head are adjustable. The solar panel
Thank you for purchasing SOLAR POWERED WITH MOTION ACTIVATED 48 LED SECURITY
can be adjusted horizontally through 360 degrees and tilted
FLOOD LIGHT
backwards through 90 degrees. The light head can be adjusted
horizontally through 180 degrees and tilted forwards or backwards
With its effortless setup and lightweight design, the light conforms to all your lighting needs. It was made to
through 120 degrees.
provide many years of service using environmentally friendly solar power.
• Low voltage indication: the red indicator light will flicker when
Specifications
accumulator voltage is below approx. 7V, which indicates the battery
100V-240V Convert 9V
voltage is deficient. When the accumulator voltage is below 6.1V,
• Coverage: 180º detection angle
the unit turned off automatically.
• Detection range: 12m
• LED single power: 0.06W
• Lithium battery controller possesses short-circuit / over-discharge /
100V-240V Convert 9V
• Matrix light: 48 super bright LEDs
overcharge protection function.
• Rated load: 3.5W Max.
• There are three modes: ON, OFF & AUTO.
• Light-control: <10LUX
• Battery: 7.4V, 1800mAH lithium battery

SPECIFICATION

1. 10V/2.5W single crystal silicon solar panel.
2. 7.4V 1800mAh (lithium battery)
(with 15' cable) ( Life: over 3 years )
3. Max continuous illumination time: 4hrs
4. Installation height: 1 to 3m
5. Light adjustment time: 10sec to 3min
6. Detection distance: 12m max (<24 Deg C)
(with 15' cable) ( Life: over 3 years )
o
7. Coverage: 180 detection angle
8. Light sensitivity: 10 to 2000 LUX
9. Working Temperature: –10 to +40
Solar Power Sensor Lamp Instruction
What's Inside the Package
94mm
94mm
Solar panels
1X 1X
10V/2.5W
12 m Cord: 5M
50mm
50mm
Car-mounted Charger
• 48 LED matrix light w/motion detector
12V Convert 9V
• Solar charger board
• User Manual
Note:Packaging items
LED
SENSOR LIGHT
Note:Please purchase according to demand.
Charger
(22 ºC) (adjustable)
Charger
Introduction
Thank you for purchasing SOLAR POWERED WITH MOTION ACTIVATED 48 LED SECURIT
FLOOD LIGHT
With its effortless setup and lightweight design, the light conforms to all your lighting needs. It was made
provide many years of service using environmentally friendly solar power.
Specifications
o
C
• Coverage: 180º detection angle
• Detection range: 12m
• LED single power: 0.06W
• Matrix light: 48 super bright LEDs
• Rated load: 3.5W Max.
• Light-control: <10LUX

INSTALLATION GUIDELINES

1. GENERAL
(a) You should install the solar panel where sunshine is not
(b) Ensure light/PIR unit is mounted on to a solid object, for
(c) Ensure PIR is clear of moving or flapping objects as these may
(d) Avoid installing it near areas of significant temperature change
(e) The PIR is more sensitive to movement across as opposed to
Solar Power Sensor Lamp Instruction
8X
Φ6 Plastic expansion 4x30 Screw
2. INSTALLATION
Detection angle
(a) Attach mounting plate to
(b) Slide light unit into mounting
Auto repair lighting
Outdoor camping lighting
Solar panels
1X 1X
10V/2.5W
Cord: 5M
• Solar charger board: 10VDC/2.5W Monocrystalline
• Continuous illumination time: (1800mAH) Up to 4 hours
• Time setting: Min. 10 seconds, Max. 3 minutes. (adjustable)
Car-mounted Charger
• LED lamp installation height: 1m to 3m.
• Working temperature: -10 ºC to +40 ºC
12V Convert 9V
• Luminous flux: 125lm
(22 ºC) (adjustable)
blocked during the majority of the day, for example away
from tall buildings and trees.
208mm
example the side of a shed, the wall of a building. Bear in
mind that the 5m wire integral to the solar panel needs to be
plugged into the light unit.
cause false triggering.
– e.g. air conditioning, central heating etc.
movement towards or away from it. So when installing it, you
should select a position so that the expected movement will
be going across the sensor.
100mm
94mm
177mm
MOVEMENT TOWARDS/AWAY
SENSITIVITY LOW
180 DEGREE DETECTION ANGLE
8X
180°
wall using fixings supplied.
(Fig.1)
plate (Fig. 2) and secure using
supplied screw in the bottom
surface of the plate/light unit.
(Fig. 3)
Charger
100V-240V Convert 9V
8X
Φ6 Plastic expansion 4x30 Screw
(with 15' cable) ( Life: over 3 years )
Fig.1
Auto repair lighting
Outdoor camping lighting
Fig. 3
• Solar charger board: 10VDC/2.5W Monocrystalline
• Continuous illumination time: (1800mAH) Up to 4 hours
• Time setting: Min. 10 seconds, Max. 3 minutes. (adjustabl
• LED lamp installation height: 1m to 3m.
• Working temperature: -10 ºC to +40 ºC
Model SMS003
208mm
MOVEMENT ACROSS
SENSITIVITY HIGH
50mm
100mm
177mm
8X
Fig. 2
Charger
100V-240V Convert 9V
(with 15' cable) ( Life: over 3 years )
94mm
50mm