Inserting An Optical Disc - Toshiba M10-S3451 User Manual

104
Learning the Basics
Using the optical drive
Manual eject hole—Use if you need to release the disc tray when
the power is off. Use a straightened paper clip or other narrow
object to press the manual eject button located inside the hole.

Inserting an optical disc

To insert an optical disc into the drive:
1 Make sure the computer is turned on.
The drive will not open if the computer's power is off.
2 Make sure the drive's in-use indicator light is off.
3 Press the drive's eject button.
The disc tray slides partially out of the drive (about 1 inch).
4 Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5 Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in
discs" on page
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
108.
"Caring for optical