Advertisement
Advertisement
Table of Contents
Summary of Contents for Clearwater Spas TPS
- Page 1 COPPER/SILVER WATER IONIZATION SYSTEM OPERATION MANUAL...
- Page 2 OPERATION OVERVIEW: The following information outlines the procedure for the setting and operation of the control panel of the TPS™ Copper/Silver Water Ionization system refered to herein as 150-10 MPC The lights and functions on the control panel are as follows: “FWD”...
- Page 3 The recommended range is between 0.25 and 0.4 parts per million (PPM). If the level is high, turn the system down by lowering the number on the readout, if it is low, increase the number. Test the copper level every day initially. When it reaches an acceptable range and remains stable, take note of the setting.
- Page 4 They may become coated with a calcium deposit. (although rare due to the Clear Balance system as part of the TPS™) This is means they require cleaning. To do this, unplug the unit, then disconnect the leads from the electrodes. Re- move them from the flow cell.
Need help?
Do you have a question about the TPS and is the answer not in the manual?
Questions and answers