Inserting a charged battery
To insert a battery:
1
Wipe the terminals of the charged battery with a clean cloth to
ensure a good connection.
2
Insert the charged battery into the slot until the latch clicks.
The battery pack has been designed so that you cannot install it
with reverse polarity.
(Sample Illustration) Inserting the battery
3
Slide the battery lock to the locked position.
4
Turn the computer right side up.
5
Reconnect any cables that were removed in step 3 of
"Removing the battery from the computer" on page
6
Restart the computer.
Taking care of your battery
The following sections offer tips on how to take care of your battery
and prolong its life.
If the battery does not slide into the slot easily, move the battery
release lock to the unlocked position and try again. Do not force the
battery into position.
Mobile Computing
Taking care of your battery
113
111.