Table of Contents
Advertisement
Quick Links
Electronic switch 2A (opto)
1
Description.................................................................................................................... 1
2
Installation .................................................................................................................... 2
2.1
Electrical Installation ..................................................................................................... 2
2.2
Mechanical Installation.................................................................................................. 2
3
Programming................................................................................................................ 2
4
Led-Display ................................................................................................................. 3
4.1
Internal Green Led......................................................................................................... 3
4.2
External Blue Led .......................................................................................................... 3
5
Technical Data .............................................................................................................. 3
6
Accessories .................................................................................................................... 4
6.1
external blue LED .......................................................................................................... 4
6.2
Magnet ........................................................................................................................... 4
7
Eg Declaration Of Conformity ................................................................................... 4
8
Instructions For Disposal .............................................................................................. 4
1 Description
The electronic switch (opto) is a small device without any moving parts. Therefore it is
resistant to any kind of impact and vibration. It is especially designed for the rough
environment in RC-models. Due to the flexible programmability it can be used for virtually
any application like lights, ignition, pyrotechnics, but also for functional models like tanks,
trucks and many more. It is also possible to control more than one electronic switches with
only 1 channel of your radio.
The electronic switch (opto) is controlled by a microcontroller and galvanically isolated via
an optocoupler from the load side. You can use a separate power source for the load. The
electronic switch (opto) switches the positive line.
The electronic switch is connected to a servo terminal on the receiver.
Electronic switch 2A (opto)
Content
www.VSpeak-modell.de
Page
Page 1/4
Advertisement
Table of Contents
Related Manuals for VSpeak Electronic switch 2A (opto)
Summary of Contents for VSpeak Electronic switch 2A (opto)
- Page 1 You can use a separate power source for the load. The electronic switch (opto) switches the positive line. The electronic switch is connected to a servo terminal on the receiver. Page 1/4 Electronic switch 2A (opto) www.VSpeak-modell.de...
- Page 2 The green LED will start flickering, the switch is turned "ON". If you only want to program a fixed switch position, you are done now. If you want to program a "ON"-range, then move the corresponding stick on the radio to the upper and lower limit. The electronic switch (opto) Page 2/4 Electronic switch 2A (opto) www.VSpeak-modell.de...
- Page 3 30 x 9 x 8 mm (PCB) Weight 6 g (incl. Cable) RX cable (0,14 mm²) Connectors switching part: 3-wire cable (0,25 mm²) 2-pin socket for the external blue LED The "ON" range can be programmed completely free. Page 3/4 Electronic switch 2A (opto) www.VSpeak-modell.de...
- Page 4 6.1 external blue LED 6.2 Magnet Cable length about 23 cm about 8 cm 7 EG Declaration of Conformity Manufacturer VSpeak-Modellbau (Volker Weigt) Priestewitz We hereby declare that the product Electronc switch 2A (opto) complies with the following European directives: 2004/108/EC...
Need help?
Do you have a question about the Electronic switch 2A (opto) and is the answer not in the manual?
Questions and answers