Quick User Guide; Controls And Programs - Hoover AWMPD 49LH7/1-S Manual

8. QUICK USER GUIDE

This appliance automatically adjusts the
level of the water to the type and quantity of
washing. This system gives a reduction in
energy consumption and a saving in
washing times.
Program selection
l
Turn on the appliance and select the
required program.
l
Adjust the washing settings if necessary
and select the required options.
DRYING (WASHER-DRYERS only)
If you would like the drying cycle to
begin automatically after washing,
select the washing
required and select the drying cycle.
Or you can finish the wash and then
select the drying programme.
l
Press the START/PAUSE button to start
the program.
l
At the end of the program, the message
"END" will appear on the display (on
some models, all wash stage indicators
lights will turn on).
l
Turn off the appliance.
For any type of wash, see the program
table and follow the operating sequence
as indicated.
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
9. CONTROLS AND
programme
A ON/OFF button
B Touch Control (programmes
C START/PAUSE button
D TEMPERATURE SELECTION button
E SPIN SELECTION button
F DELAY START button
G STEAM button
H OPTIONS button
I STAIN LEVEL button
L CARE DOSE button
E+F BUTTON LOCK
M DISPLAY
65
PROGRAMS
59'
A ll in One
44'-30'-14'
B
H E F D I L G C A
selection)
Eco
20°C
}
M