Bastl Knit Rider Manual

The Knit Rider ex
ander adds clock OUT and reset IN OUT
connections to the Knit Rider se
uencer. It doesn't work
without Knit Rider Eurorack module.
instruction
Clock Out outputs pulse e ch time step on the
Knit Rider ch nges (1 step = 4 substeps). It lso h s
n indic tior LED.
The Reset socket cts s n output or input, depending
on whether the Knit Rider is m ster or sl ve. In m ster
mode, the reset outputs pulse e ch time you press
the st rt stop button. In sl ve mode, it cts s n input.
When it detects pulse, the sequencer goes to its first
step (it will pl y the first step with the first incoming
clock pulse).
ddition l fe ture of this exp nder is 3-w y p ssive
multiple with clock inverter. The lower 3 connectors
re simple p ssive multiples.
The uppermost connector outputs n inverted version
of the sign l in the p ssive multiple. The inversion is
done with 2.5V threshold (0V or lower becomes 5V
nd 5V nd higher becomes 0V).
www.b stl-instruments.com
CLK OUT
RESET
INV OUT
PASSIVE
MULTIPLE