Advertisement
SYNTH VOICE
ACID
* Connect CV or PITCH output from keyboard that produces 1 volt per octave CV signals.
*Press and hold REC. *Slide VCO0
up and down then release REC. 3. Record a pattern in
* For a traditional synth voice, plug the main OUT of the softPop to the input of a voltage controlled
both pattern locations. *Tweak the filter for the acid sass. *Adjust VCO1
to get a
amplifier (VCA). Control the VCA with an envelope trigger by the GATE output of the keyboard.
softer or sharper envelope. * If you turn it up "too much" it will go nuts.
Advertisement
