Advertisement
Tata Pad was designed as a support device for parental supervision
Disclaimer
and, as such, does not replace it.
Use of Tata Pad does not, in any way, substitute the responsibility and/
or supervision of the vehicle's driver (and/or of its other occupants).
Tata Pad is only a support tool. Never leave your child unattended in
a car.
Filo S.r.l. cannot, in any way, be held responsible in case of adverse
events and/or consequences (also linked to electronic device malfun-
ction) of any kind, since Tata Pad is solely an aid and alarm device for
preventing events and/or consequences caused by forgetfulness.
The use of the device does not, in any case, replace the supervision and
responsibility of the driver/custodian/attendant/sitter/guardian or
whoever has the child in safekeeping.
Read this booklet carefully before installing and using Tata Pad and
the related App. In fact, it is necessary to understand its functions,
characteristics, and limits before using them.
For correct
Checks to be performed for each Tata Pad use:
operation
1.
The smartphone must be switched on and have enough autonomy
for the period of paired use with Tata Pad.
Bluetooth® must be active.
2.
The airplane mode must be deactivated.
3.
4.
GPS must always be active.
5.
The smartphone must have an active data connection.
Failure to comply with the above will result in Tata Pad and/or Tata app
malfunctioning, which may disable the system and/or not allow alarm
messages to be sent and/or received.
Tata Pad works only in the presence of a smartphone with Tata app
installed.
If the smartphone is turned off, then Tata Pad cannot function properly.
If Bluetooth® is damaged, then Tata Pad cannot function properly.
Download the Tata app from official stores only.
Phone location permission must be enabled for the Tata app to sup-
port the full system operation.
Warnings
Do not leave packaging materials within reach of children as they are
potentially dangerous.
Before use, check that the product and all its parts are not damaged.
Otherwise, do not use the device and contact qualified personnel or
the retailer instead.
Correct Tata Pad storage is important to fully preserve its functioning
and must comply with temperature (from -5°F to +140°F) and humidity
(< 95%) constraints.
Insert the batteries, making sure the polarity is correct.
Battery
Tata Pad is powered by two CR2032 batteries.
Tata Pad's battery level can be monitored through the app. In case of
low level, the user can independently replace the battery. The new
battery must have the same characteristics and respect the correct
polarity.
To replace the battery, the user needs to open the zipper and extract
the interior, making sure to keep it in a dry and clean place when free
of its cover.
Lift the frontal terry of the extracted piece where two cuts (just below
the central hole) can be seen. Replace the two batteries, making sure
to respect the correct polarity.
Declaration
With the document herein, Filo warrants that Tata Pad complies with
the seven essential requirements and the other relevant provisions
of conformity
established by the 2014/53/EU Directive. A copy of the complete de-
claration of conformity can be consulted at: getmytata.social/certifi-
cazione-conformita
According to the European Commission decision No. 2000/299/EC dated
04/06/2000, the frequency band used by this product is harmonized
throughout the EU countries. Therefore, this is a class 1 product and can
be freely used in all countries of the European Community.
Model: Tata Pad
Contains FCC ID:QOQBGM12LMA
This device complies with part 15 of the FCC Rules. Operation is
The symbol of the crossed bin shown on the equipment indicates that, at the end of its life cycle, the product
subject to the following two conditions: (1) This device may not cause
requiring separate disposal from domestic waste, must be taken to a differential waste collection center for
harmful interference, and (2) this device must accept any interfe-
electric and electronic equipment or returned to the seller when a new, equivalent piece of equipment is
rence received, including interference that may cause undesired
purchased. The user is responsible for handing over the piece of equipment to the appropriate differentiating
operation.
center at the end of its life cycle. Suitable differentiated waste collection in prevision of the re-cycling of
the decommissioned equipment and eco-compatible disposal contributes to preventing possible negative
NOTE: This equipment has been tested and found to comply with
consequences to the environment and health and encourages the recycling of materials used to manufacture
the limits for a Class B digital device, pursuant to part 15 of the FCC
the product. Unauthorized disposal of the product by the user entails administrative penalties pursuant
Rules. These limits are designed to provide reasonable protection
to Legislative Decree no. 22/1997 6 (Art.50 et seq. of Legislative Decree 22/97). For more information on
against harmful interference in a residential installation. This equi-
the collection systems available, please contact your local waste disposal service or the shop where you
pment generates, uses and can radiate radio frequency energy and,
purchased the product.
if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
The symbol of the crossed-out bin shown on the batteries or on the product packaging indicates that, at the
end of its useful life, these items need to be treated separately from household waste. They must not be
disposed of as urban waste, but transferred to a waste disposal center for separate collection, or returned
— Reorient or relocate the receiving antenna.
to the retailer when purchasing new rechargeable and non-rechargeable batteries. The possible chemical
— Increase the separation between the equipment and receiver.
symbol Hg, Cd, Pb, placed under the crossed-out bin indicates the type of substance contained in the bat-
— Connect the equipment into an outlet on a circuit different from
tery, Hg = Mercury, Cd = Cadmium, Pb = Lead. Users are responsible for providing the end-of-life batteries
that to which the receiver is connected.
to the appropriate collection facilities in order to facilitate treatment and recycling. The adequate separate
collection for the subsequent forwarding of dead batteries for recycling, processing and environmentally
— Consult the dealer or an experienced radio/TV technician for help.
compatible disposal, helps to avoid possible negative effects on the environment and on human health and
promotes the recycling of substances contained in the battery. Unauthorized disposal of the product by the
user involves damage to the environment and human health. For more information on the collection systems
IMPORTANT: Changes or modifications not expressly approved by
Filo S.r.l. could void the user's authority to operate the equipment.
available, please contact your local waste disposal service or the shop where you purchased the product.
THIS PRODUCT
IS IN COMPLIANCE WITH
EU DIRECTIVE 2012/19/EC.
COMPLIANCE WITH EU DIRECTIVE
2006/66/EC AND SUBSEQUENT
AMENDMENTS.
Advertisement
