Download Print this page

HTC VIVE 2Q3Z100 Manual

Download this manual

Controllers

About the VIVE controllers

Use the controllers to interact with objects in the VR world.

The button labels on the controllers that you received with your developer kit may vary. Please

check the hardware for the matching label.

Front view

1. Joystick

2. System/Menu button

3. B/Y button

4. A/X button

5. B button

6. A button

For certification only

Page 1 Controllers About the VIVE controllers Use the controllers to interact with objects in the VR world. The button labels on the controllers that you received with your developer kit may vary. Please check the hardware for the matching label. Front view 1.
Page 2 Back view 1. Right bumper 2. Right trigger 3. Grip button 4. Left bumper 5. Left trigger 6. Battery cover Inserting the batteries into the controller Make sure that the included batteries have been inserted before turning on the controllers. Gently push down on the icon near the top of the battery cover, then slide and lift to remove it.
Page 3 Removing the batteries from the controller Gently push down on the icon near the top of the battery cover, then slide and lift to remove it. Pull up the thin film in the battery compartment to remove the batteries. Replace the battery cover. For certification only...
Page 4 Attaching the lanyards to the controllers Using the lanyards may help prevent the controllers from accidentally being dropped; however, please do not fling or violently throw the controller as the lanyard may break. Gently push down on the top of the battery cover, then slide and lift to remove it. Insert the lanyard loop on the corresponding hole at the bottom of the controller.