Page 1
MICROBRITE® EN - WHITE LED LIGHT FOR POOL AND SPA QUICK START GUIDE Compact LED light for 1.5" pool wall fitting 620428-EU et 620457-EU IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS / SAVE THESE INSTRUCTIONS Download the full instructions available in EN / FR / NL / DE / IT / ES on www.pentairpooleurope.com...
Page 2
COMPACT LED LIGHT FOR 1.5" POOL WALL FITTING Pentair thanks you for placing your trust in the company and purchasing MICROBRITE®, the compact LED light for 1.5» pool wall fitting. Please carefully read this user manual to fully benefit from all of the functions of MICROBRITE®. Store it carefully so that it can be consulted at any time.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS DANGER - SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS LIGHT IS NOT INSTALLED AND USED CORRECTLY. DANGER - INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING THE POOL AND/OR SPA LIGHT. The light should be positioned so that prolonged staring into the luminaire at a distance closer than 0.51m is not expected.
Page 4
WARNING - This product is intended for use in swimming pool applications only. POOL AND SPA FIXED LUMINARIES - Follow these guidelines when installing or replacing Pentair Water Pool and Spa fixed luminaries.
Page 5
GLOBAL PRESENTATION MicroBrite® light overview This manual describes how to install, replace and operate the 12 VAC MicroBrite light for pool and spa. The MicroBrite light provides exceptional brilliance and lighting uniformity. For new pool and spa designs, their compact size delivers the freedom to add dynamic lighting in places never before possible. Let your imagination take you to brighter places! GLOBAL WIRING INSTALLATION RULES MicroBrite®...
The Junction Box must be installed as shown below. The low voltage transformer (compliant with NF EN 61558-2-6) must be located in the technical room. Waterproof connection IP65 (ex : Pentair G-DECKBOX-1) 15 cm extra cord To technical room DRY/SEALED CONDUIT INSTALLATION (USE PROVIDED KIT) Adaptator 1-1/2”...
Page 7
WET CONDUIT INSTALLATION Wrap threaded sealant tape around the adaptor 1-1/2” Standard Wall Fitting By hand, turn light body counter-clockwise to twist cord Cord should be twisted counter-clockwise Insert adaptor male thread adaptor ring into female thread of wall fitting. By hand then turn light clockwise.
Transformer compliant with NF EN 61558-2-6 Maximum wattage using multiple lights (with a 300 Watt isolation transformer). IMPORTANT! When using multiple 12 VAC Pentair pool and spa lights the total allowable light wattage should not exceed 80% of rated value.