Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for tousek Rollco LWS125/X
- Page 1 Installation manual Steel cantilever system Rollco LWS 125/X ®...
-
Page 2: Maintenance
• Clean and sligthly grease the tread in the inside of the profile. This manual is the sole property of the TOUSEK Ges.m.b.H. and may not be made available to competitors. All rights reserved. No part of it may be reproduced without our prior written permission. - Page 3 ATTENTION: the assembly and installation of the gate and cantilever system may only be carried out by trained and qualified staff. For perfect function and avoiding damages at the cantilever system, the following planning- and processing rules have to be strictly followed! - 3 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018...
-
Page 4: Taking Into Operation
- Check the assembly bolts - Check if the door runs correctly into the guide-in bracket resp. guide-in fork bracket. - Clean and sligthly grease the tread in the inside of the profile - 4 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018... -
Page 5: Installation
110 support length entrance width DL min. 150 min. = minimum distance between foundation end and middle of track (anchor bolt firmness) gate axis INSIDE measures in mm - 5 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018... - Page 6 • the distance AS between bolts is depending on entrance width and load weight (250–500mm). • the cantilever track and gate frame must be connected with each other in a fixed way! - 6 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018...
- Page 7 • the cantilever track opens slightly at the ends when coming out of factory. When tightening the side bolts the track profile will be tighten together. This additional fixing is absolutely essential when using the end plates also as limit stops! - 7 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018...
- Page 8 60 x 60 x 3, 80 x 80 x 3, bolt spacer or 120 x 80 x 3 steel gear rack Important • with steal gear rack please use the edged mounting base plate. - 8 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018...
- Page 9 • Examples of fixed limit stops as safety devices: (1) Guide-in bracket, (2) counter pillar, (3) transverse bore and through screw (M12) in the profile rolling gears rolling gears rolling gears - 9 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018...
-
Page 10: Dimensioned Drawing
End plate with roller Rollco LWS 125 ® foundation plate Guide-in bracket Rollco LWS 125 ® We reserve the right to change dimensions and technical specifications without prior notice. - 10 - tousek / E_ LWS-125/X_X40801104 / 22. 05. 2018... - Page 12 Fax +43/ 1/ 667 89 23 info@tousek.at Tousek GmbH Germany D-83395 Freilassing Traunsteiner Straße 12 Tel. +49/ 8654/ 77 66-0 Fax +49/ 8654/ 57 196 info@tousek.de Tousek Benelux NV BE-3930 Hamont - Achel Buitenheide 2A/ 1 Tel. +32/ 11/ 91 61 60 Fax +32/ 11/ 96 87 05 your service partner: info@tousek.nl Tousek Sp. z o.o. Poland PL 43-190 Mikołów (k/Katowic) Gliwicka 67 Tel. +48/ 32/ 738 53 65 Fax +48/ 32/ 738 53 66 info@tousek.pl Tousek s.r.o. Czech Republic CZ-130 00 Praha 3 Jagellonská 9 Tel. +420/ 2/ 2209 0980 Fax +420/ 2/ 2209 0989 info@tousek.cz tousek We reserve the right to change dimensions and/or technical specifications with- E_ LWS-125/X_X40801104 out prior notice. Claims resulting from misprints or errors cannot be accepted.
Need help?
Do you have a question about the Rollco LWS125/X and is the answer not in the manual?
Questions and answers