Summary of Contents for LOGOPAK LogoClean Plastic
- Page 1 Cleaning kit LogoClean Plastic Contents and Operating instructions Status: 2020-03-31 Version: V3 P EN www-logopak.com...
- Page 2 Cleaning kit LogoClean plastic Contents and Operating instructions Cleaning kit LogoClean Plastic Cleaning kit LogoClean Plastic Pos. Quantity Description Article-Nr. Complete Cleaning kit 15016831 LogoClean 10016659 LogoCare 15037967 Cleaning spatula 10016566 Cleaning cloths 10020276 Cleaning sticks 10001142 Cleaning brush 10017114...
- Page 3 Cleaning kit LogoClean Plastic Contents and Operating instructions LogoClean LogoClean Description: Universal cleaner 10016659 Contents: 1x Pump spray, 300 ml Use: For cleaning the print head of the print engine. For removing label residue on drive shafts. For general cleaning of labelling systems and other system components.
- Page 4 Cleaning kit LogoClean plastic Contents and Operating instructions LogoCare LogoCare Description: Maintenance oil 10016660 Contents: 1x pump spray, 50 ml Use: For filling the oiler on the linear rails or for cleaning the rails directly. Handling: Use according to information on the bottle.
- Page 5 Cleaning kit LogoClean Plastic Contents and Operating instructions Cleaning spatula Cleaning spatula Description: Cleaning spatula, 100 mm 10016566 Contents: 3x Cleaning spatulas Use: For cleaning the print head of the print engine. - Helps to remove label residue or heavy soiling from the print head.
-
Page 6: Cleaning Cloth
Cleaning kit LogoClean plastic Contents and Operating instructions Cleaning cloth Cleaning cloth Description: Cleaning cloth, white, fine felt, lint-free 10027190 Contents: 1 set of 5 cleaning cloths Use: For general cleaning of labelling systems and other system components. Handling: Moisten the cleaning cloth with LogoClean if necessary. - Page 7 Cleaning kit LogoClean Plastic Contents and Operating instructions Cleaning sticks Cleaning sticks Description: Cleaning sticks, plastics, w =12 mm / ½” 10001142 Contents: 5x Cleaning sticks Use: For cleaning the print head in the print engine. Handling: • Lift the print head Moisten the leather facing of the cleaning stick with LogoClean.
-
Page 8: Cleaning Brush
Cleaning kit LogoClean plastic Contents and Operating instructions Cleaning brush Cleaning brush Description: Cleaning brush, 12 mm / ½“ 10017114 Contents: 1x cleaning brush Use: For general cleaning of labelling systems and other system components. Version: V3 P EN... - Page 9 Cleaning kit LogoClean Plastic Contents and Operating instructions Gloves Gloves Description: Gloves 10016666 Material: Nitrile, with rolled cuff; extremely tear-proof, non-powdered and non-allergenic. Contents: 4x gloves Note: For protecting the skin from chemical splashes and cleaning agents. Status: 2020-03-319-09...
-
Page 10: Plastic Case
Cleaning kit LogoClean plastic Contents and Operating instructions Plastic case Plastic case Description: Plastic case 10016664 Use: For storing the cleaning kit. Version: V3 P EN... - Page 11 All rights, including translation, reserved. No part of this manual may be reproduced in any form (e.g. by printing, photocopying, mi- crofilm, data transfer or other method) without written permission of Logopak Systeme GmbH & Co. KG or processed using electronic systems, copied or distributed.