PC-Pen T-20 Quick Start Manual

深圳市斯达特科技有限公司
Shenzhen PC-PEN Co.Ltd
Tel:+86-755-83995718
Addu:12A01 Leizhen Building Funimg Rd,Shenzhen China

1. Run Starter pen Driver

Insert the starter pen Driver into your DVD/CD-ROM
Run "Setup .exe" from CD-ROM to install the driver and follow the steps on the
screen until finish.

2. Plug the USB cable into the USB port of your computer.

When you plug the USB cable ,an icon as follow will appear at the right corner of
the computer screen to indicate the pen working mode:
Mouse Mode
Press the icon then the pen will work in fully function of mouse.
Press the speed control button on the pen to choose the move
speed of the mouse pen.
Pen Mode
power point, outlook
Press the speed control button on the pen to choose a suitable level from
three different levers ,to change the writing speed and word size.
(If it's a wireless laser mouse pen, before use it, Please insert the pen into the
pen stand to charge until the light on the pen stand turn green, then turn the
power switch to "ON" position.)
Press the icon then the pen will work as a real pen.
Press the pen nib and you can write or draw on word ,excel,
Fax:+86-755-83995708
and other office 2003/2007 tools.