Cub Cadet 19A70040100 Operator's Manual page 13

Flange
Figure 4-18
Installing the Discharge Chute On The Tractor
1. Reinstall the cutting deck, if previously removed, to the
tractor reversing the instructions for Deck Removal in
operator's manual of the tractor.
2. Raise the deck to its highest position.
3. Raise the chute deflector (1 in Figure 4-19) on the deck and
hold it while you position the discharge chute over the
chute opening.
4. Insert the end of the discharge chute top mounting bracket
into the hole provided on the cutting deck as detailed in 2
of Figure 4-19.
5. Pivot the discharge chute rearward inserting the tab in
the discharge chute top mounting bracket into the space
provided between the mowing deck and the discharge
chute hinge, as shown in 3 of Figure 4-19.
Figure 4-19
6. Attach the retainer strap on the discharge chute to the
retainer clip on the deck. See Figure 4-20.
7. Install the chute adapter onto the chute elbow by lining up
the tabs and sliding the adapter over the chute elbow, as
shown in Figure 4-21. Secure the chute adapter by installing
two 710-3013 hex screws into the holes shown and secure
with two 712-0442 cap lock nuts, included in hardware
pack 689-00337.
1
3
2
Figure 4-20
Figure 4-21
S 4 — A & i
ection SSembly nStAllAtion
13