Summary of Contents for Land CT-300B
- Page 1 Curve Treadmill Manual Note: The code interpretation right of the product is based on the final confirmation of the order. This equipment meets the GB17498.1/GB17498.6 Class S Standard (S=studio)
-
Page 2: Table Of Contents
Catalog ......2 Important safety instructions ....3 Product description ......5 Installation instructions ......6 Instructions for use ......7 Display description (model CT300B) ..9 Technical data ......11 Equipment movement and adjustment ....12 Routine maintenance ....13 Fault diagnosis ...... -
Page 3: Important Safety Instructions
Do not let objects fall or insert the opening parts . For certain special exercises,relevant doctor issued certificate will be needed before use, but also to meet the conditions of use of LAND. Under special conditions, this product can only be used under the close supervision of a professional doctor. - Page 4 LAND will not be responsible for the loss caused by the following reasons: maintenance without authorization, improper use, accident, negligence, improper assembly or installation, any modifications or adjustments without the written authorization of LAND and users do not comply with the user manual when using, running and maintenance of the product.
-
Page 5: Product Description
Product Description Display(A):Display ongoing exercise ,Model No CT-300B is equipped with display. Running Belt (B): Surface is polyurethane,which can ease the impact on the joints. Lateral Handle(C):When standing on treadmill or losing balance ,you can hold it to stand firm;when quick walking or running ,you can keep balance by it . -
Page 6: Installation Instructions
10,spring pad 8（Φ10） (Picture 4) E、 Fixing the screen with Inner Hex Flat Head Screw 10(M10*20)、Washer 11 （Φ10） (Picture 5) F、 Re-install Side upper boards (01)and side shells (02) (Picture 1) The above instructions for CT-300B installation way with it. -
Page 7: Instructions For Use
Instructions for use Hold the side handle,then step on the running belt from the back.View front ,then put the feet on both sides of the upper boards. Standing firm on the running belt and then begin to exercise. At the beginning of exercise, hold the handle to keep safety.After adaption ,release your hand from the handle which can improve the sense of balance and maintain the correct posture. - Page 8 BRISK WAILKING FAST RUNNING Side shuffle step WARNING User must keep concentrate, to avoid losing stability and balance Two person use one treadmill at the same time is forbidden CT300B treadmill designed and produced only for simulation walking and running, Any other purpose will be regarded as improper behavior and may cause danger.
-
Page 9: Display Description (Model Ct300B)
Display description (CT-300B) 1. Key function Used for switch Windows TIME、DISTANCE、CALORISE、 PULSE Select&Confirm/Erase This key has functions of the confirmation choice, and (MODE/RESET) setting time confirmation. Constant Press for 2 seconds to clean the input settings. Settings Press one time will be added one time, constant press is set as quick adding. - Page 10 Enter motion picture： Boot into motion picture Press Selection (MODE) key to choose (TIME)、(DISTANCE)、(CALORISE)、 (PULSE),Press the (SET) key to set the value,Confirm by pressing the Confirmation (MODE)key. Inputting signal, time (TIME), distance (DST), and calories (CAL) to start counting. Note: When the display fades,Please replace the battery.
-
Page 11: Technical Data
Technical data Model No. CT-300B Power Supply(Optional Adapter) N.Weight 195KG Max User Weight 180KG Noise Degree Below 80dB (A) Protection Level IP 20 Running Temperature From +5°C to +40°C Electrical insulation level II Level 1680*960*1980mm Product Dimension（L*W*H） 2000*1100*900mm Package Dimension（L*W*H）... -
Page 12: Adjustment
Movement and adjustment of equipment The equipment is equipped with two fixed front wheels.If need to move the equipment, just lift it slightly and move forward or backward. As the equipment is heavy, you had better to find a few people to move together. If the floor condition isnot suitable to use wheel to move, lifting and transporting equipment will be needed . -
Page 13: Routine Maintenance
All operations of cleaning and maintenance should be carried out under fully static conditions of running belt. What unmentioned care and maintenance operations would be needed in this manual,please contact LAND Technical Services. Periodic maintenance,adjustment or lubrication of the product shall be carried out by LAND Technical Support Services. -
Page 14: Fault Diagnosis
Fault Reason Remedies Insufficient voltage Please replace battery When screen cannot be Power cord damage Contact LAND technical support started services. Check connection status. The power cord is not plugged in. There is a problem Check connection status. installing the wires...
Need help?
Do you have a question about the CT-300B and is the answer not in the manual?
Questions and answers