Download Print this page

Eternal Lighting BT4812 Installation Instructions

Multi voltage bell / chime transformer

Hide thumbs

EVENTUALLY, YOU MAY WANT TO

REPLACE THIS PRODUCT:

Regulations require the recycling of Waste from

Electrical and Electronic Equipment (European

"WEEE Directive" effective August 2005—UK

WEEE Regulations effective 2nd January 2007).

Environment Agency Registered Producer: WEE/

GA0248QZ.

WHEN YOUR PRODUCT COMES TO THE END OF

ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE

RECYCLE IT WHERE FACILITIES EXIST - DO NOT

DISPOSE WITH HOUSEHOLD WASTE.

Issue 2014

FOR PRODUCT ADVICE:

• T: 01933 673 144

• F: 01933 678 083

• E: sales@eterna-lighting.co.uk

CLEANING:

• Clean this transformer only with a soft dry cloth.

• Do not use any chemical or abrasive cleaners.

IF YOU EXPERIENCE PROBLEMS:

If you believe your product is defective, please return

it to the place where you bought it. Our Technical

Team will gladly advise on any Eterna Lighting

product, but may not be able to give specific

instructions regarding individual installations.

For breakage information visit:

www.eterna-lighting.co.uk

Visit our website:

www.eterna-lighting.co.uk

Installation INSTRUCTIONS

A guide for qualified electricians

Model:

BT4812

Multi Voltage Bell / Chime Transformer

These instructions are provided as a guideline to assist you.

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION

AND RETAIN FOR FUTURE REFERENCE

Pack contents:

1 x Bell transformer

4 x Fixing screws

4 x Wall plugs

Table of Contents

Need help?

Do you have a question about the BT4812 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eternal Lighting BT4812

Page 1 1 x Bell transformer For breakage information visit: 4 x Fixing screws www.eterna-lighting.co.uk 4 x Wall plugs BT4812 Multi Voltage Bell / Chime Transformer Issue 2014 These instructions are provided as a guideline to assist you. FOR PRODUCT ADVICE: PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION •...
Page 2 READ THIS FIRST: INSTALLATION: REPLACEMENT LAMP TYPE: If the location of your new transformer requires the provision of a new electrical supply, the supply Supply Voltage: 240V 50Hz Check the pack and make sure you have all of 1) Choose the location for your new transformer must conform with the requirements of the Building the parts listed on the front of this booklet.