Advertisement
5
Storage, transportation and environment
If the titration units are to be stored temporarily or transported, the best solution to protect the devices is to
use the original packing. In many cases the original packing will no longer be available, so that an alterna-
tive packing has to be put together. Welding the titration units in a foil is an advantageous solution. Prior to
this it has to be made sure that no liquid is left in the dosing unit.
If the titration unit is to be sent to a service shop, it is necessary to indicate the titration solution last used on
the accompanying documents or on the piston burette. Otherwise the service shop will dispose of the parts
damaged or to be replaced as special waste at the charge of the customer.
The room selected for storage should provide the following conditions:
Ü temperature between + 10 and + 40 °C for operation and storage,
Ü humidity according to EN 61 010, Part 1: maximal relative humidity 80 % for temperatures up to 31 °C,
linear decrease down to 50 % relative humidity at a temperature of 40 °C.
Although you will use your titration device for a very long time, so that the following information comes far
too early: But if your system has reached the end of its life, please observe the regulations applicable for
your land and town as to its disposal.
6
Accessories and spare parts
Accessories
TE 96
pH electrode (only for TitroLine 96)
TZ 1509 Bottle set for titration agents
TZ 2008 Bottle set-on unit with S 40 thread for reagent bottles, e.g. Merck make
TZ 2005 Bottle set-on unit with GL 45 thread for reagent bottle, e.g. Riedel-de Haën, Schott make
TZ 3025 Stirrer TM 96 with PTFE stirring rod
TZ 3094 1.0 m data cable RS-232-C:
TZ 3460 Printer with RS-232-C interface including 1.5 m printer cable TZ 3095
TZ 3095 1.5 m data cable RS-232-C
TZ 3096 1.5 m data cable RS-232-C
TZ 3097 1.5 m data cable RS-232-C
TZ 3098 Data cable set:
1.5 m data cable RS-232-C:
Adapter:
TZ 3650 Burette point consisting of hose, shaft and detachable point
TZ 3680 Manual key button
Upon inquiry: Memory cards adapted to a specific titration method.
Spare parts
Piston Burettes TITRONIC
TZ 3400
Hose set with 5 pieces of thread connections including sealing elements and hoses
TZ 3415
Hose outer Ø 3 x 0.5 mm, length 100 cm
TZ 3430
Protective basket including installation nut
TZ 3630
Mounting wrench
Piston Burette TITRONIC
1. side and 2. side: 4-channel mini DIN plug
with plug for printer connection:
1. side: 4-channel mini DIN plug
2. side: 25-channel sub-mini-D plug
for computer (PC) with 25-channel plug:
1. side: 4-channel mini DIN plug
2. side: 25-channel sub-mini D socket
for computer (PC) with 9-channel plug:
1. side: 4-channel mini DIN plug
2. side: 9-channel sub-mini socket
1. side: 4-channel mini DIN plug
2. side: 9-channel sub-mini D socket
9-channel plug → 25-channel socket
96, TITRONIC
97/20, TITRONIC
15
97 → Piston Burette TITRONIC
97/50 and Titration Unit TitroLine 96
â
97
Advertisement
