Summary of Contents for Aspect DVR-2M-4-2
- Page 1 DVR-2M-4-2 DVR-8M-4 DVR-2M-8-2 DVR-8M-8 DVR-2M-16-2 DVR-8M-16 DVR-2M-32 DIGITAL VIDEO RECORDER QUICK START GUIDE Technical Documents DIGITAL VIDEO RECORDER QUICK START GUIDE...
-
Page 2: What's In The Box
DC 12V PSU (4ch/ 8ch/ 16ch) HDD Mounting Screws Rack Mount Ears (16ch/ 32ch) UK Kettle Lead (8ch/ 16ch/ 32ch)* Quick Start Guide QR Code *Not required with DVR-2M-4-2 & DVR-8M-4 1. INSTALLATION Rear Panel 1 – DVR-2M-4-2 DVR-8M-4 DVR-8M-8 & DVR-2M-8-2... - Page 3 RCA connectors for the connection of microphones and speakers For connecting USB devices such as a mouse or back up device Front Panel 1 – DVR-2M-4-2 2 - DVR-2M-8-2, DVR-8M-4, DVR-8M-8 3 – DVR-2M-16-2, DVR-8M-16 4 – DVR-2M-32 Name Description IR REMOTE CONTROL RECEIVER Receives the control signal from included remote control.
- Page 4 2. INSTALLATION: SYSTEM TOPOLOGY ASPECT is designed as an out of the box CCTV system which has been optimised to improve the installation experience. Connect the ASPECT AHD cameras to the BNC ports of the ASPECT DVR, display the video and automatically start recording the camera.
-
Page 5: Startup Wizard
3. START UP WIZARD 1. The startup window will appear after the enhanced security password has been set 2. The startup wizard will guide the user through the initial setup of the DVR 3. Use the tick box to set whether or not the start-up wizard will open on future boot ups 4. - Page 6 Ensure that this step is repeated for any new users. Remember, if the admin password is changed in this step the connection details within the ASPECT app will need to be updated. 5. START UP WIZARD: SET CONTINUOUS, ALARM & SYSTEM ALARM RECORDING As default all channels are set to record all types.
- Page 7 6. START UP WIZARD: NETWORK SETTINGS DHCP is enabled by default. Untick DHCP to apply a static IP address, ensure to configure the correct settings for the network to enable stable connection to IP cameras in the IP same range and the external network for remote access.
- Page 8 Note: If the users smart phone is not recognising the QR code to scan for the information. First of all try rotating the camera 90 degrees to hold the phone horizontal to scan the code. Secondly, search for and install Aspect Viewer app from the place where you download and install apps from DIGITAL VIDEO RECORDER QUICK START GUIDE...
-
Page 9: Adding Ip Cameras
8. LIVE VIEW – ENTER THE MENU From Live View, right click the mouse to access the menu. Main Menu – Access to all NVR function and settings Start-up Wizard – Launch the start up wizard Auto channel Config – Search and add all compatible IP cameras ... -
Page 10: Reset User Password
10. RESET USER PASSWORD Aspect devices support password reset function, to be used when a user has forgotten their user account password. For the function to work, the recorder must be properly configured to a network, if there is no network available please contact your provider for a resolution. - Page 11 11. PLAYBACK Right click the mouse in Live View then select ‘Playback’. From the top left drop down list select the type of playback, 6 types of playback are available: o Normal playback o Event playback o Label playback o Smart playback o Time division playback o Snapshot playback...
- Page 12 14. PC PLAYBACK After performing a backup, to play the video on a computer, use the ASPECT video player. 1. Launch ASPECT player, downloaded from the QR code on this document 2. Navigate to Playlist and select ‘+’ then ‘add file’...
Need help?
Do you have a question about the DVR-2M-4-2 and is the answer not in the manual?
Questions and answers
my aspect cctv channel 3 has changed to 7 how do i change it back to 3 as i have lost camera picture
@Mr Colin Jamieson
To change the channel from 7 back to 3 on the Aspect DVR-2M-4-2 and restore the camera picture:
1. Go to Main Menu > Setting > Channel > Channel Type.
2. Use the tick boxes to select channel 3.
3. Ensure it is set correctly (e.g., change it back from IP to analog if needed).
4. Click ‘Apply’. The DVR will reboot to apply the changes.
This should restore the camera picture on channel 3.
This answer is automatically generated