Display Problems - Toshiba 5105-S607 User Manual

that the program does not assign different meanings to any of
the keys.
You have connected an external keyboard and the
operating system displays one or more keyboard error
messages.
If you have a second keyboard, try it. If it works, the first
keyboard may be defective or incompatible with your
computer.

Display problems

Here are some typical display problems and their solutions:
The display is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by
pressing
password, press the
If no password is registered, press
reactivates and allows you to continue working.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, press
and
F5
problem, press
display priority to its previous setting.
If you are using an external monitor:
❖
Check that the monitor is turned on.
❖
Check that the monitor's power cable is firmly plugged
into a working power outlet.
❖
Check that the cable connecting the external monitor to
the computer is firmly attached.
❖
Try adjusting the contrast and brightness controls on the
external monitor.
and simultaneously. If you have registered a
Fn F1
Enter key
simultaneously (once). If this does not correct the
and
Fn
If Something Goes Wrong
Resolving a hardware conflict
, type the password and press
Enter
simultaneously again to return the
F5
. The screen
235
.
Enter
Fn