Citizen H82 Abbreviated Instruction

H82*
Abbreviated instruction
• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual:
Component identification
City
indication
Hour hand
24-hour
24
hand
Second hand
12
18
Reception
indication
(OK/RX/NO)
Local time 24-
hour hand
• Actual appearance may differ from the
illustration above.
• The crown has two positions when pulling it out.
Checking the power reserve
Push the crown in to position 0 .
1.
Press and release the lower right button Ⓐ .
2.
The function hand indicates the power reserve amount.
Indication
About 180
Duration
- 130 days
Power
Power
reserve is
reserve
sufficient.
Press and release the lower right button Ⓐ to finish
3.
checking.
• The hand automatically returns to indicate current time in 10
seconds.
Checking the signal reception result
This watch receives the time signal automatically at night.
Push the crown in to position 0 .
1.
Press and release the lower right button Ⓐ .
2.
The second hand indicates the result of the last reception.
Indication
OK
The reception was successful.
NO The reception failed.
• Try signal reception following the steps in "Receiving the
signal manually (on-demand reception)" if the last reception
failed.
Function hand
(Day of week/power reserve/
summer time)
Minute hand
Button Ⓑ
Date
indication
Crown
24
Local time minute
6
hand
12
Button Ⓐ
Alarm indication
(ON/OFF)
Crown's position
0 1 2
About 130 About 30 - Approximately
- 30 days 2 days 2 days
Power
Insufficient
Power
reserve is
charge
reserve
getting low.
is OK.
Charge immediately.
Reception result
Press and release the lower right button Ⓐ to finish
3.
checking.
• The hand automatically returns to indicate current time in 10
seconds without executing any operation.
Setting the world time
• This watch can indicate the home time and local time at the same
time.
• The local time is indicated with the 24-hour hand. Keep this in
mind when checking.
Checking the settings of the home time and local time
Push the crown in to position 0 .
1.
Press and release the upper right button Ⓑ .
2.
The second hand indicates the current home time city and the
function hand indicates the summer time information. (For
information of summer time, see "Setting summer time".)
Press and release the upper right button Ⓑ .
3.
The second hand indicates the current local time city and the
function hand indicates the summer time information.
• Each time you press button Ⓑ , indication of the second hand
changes as follows:
① Home time city → ② local time city → ③ normal
movement → (Back to the top)
Press and release the upper right button Ⓑ to finish
4.
checking.
Setting the home time and local time
Pull the crown out to position 1 .
1.
The second hand indicates the current city setting of the
home time and the function hand indicates the summer time
information.
2.
Rotate the crown to select a city.
Select the home time city.
Press and release the lower right button Ⓐ .
3.
The second hand indicates the current city setting of the
local time and the function hand indicates the summer time
information.
• Each time you press button Ⓐ , indication changes between
the home time city and local time city alternately.
4.
Rotate the crown to select a city.
Select the local time city.
Push the crown in to position 0 to finish the procedure.
5.
H82* instruction manual
Continued on the next page