Watch A Connected Device - Sharp LC-46LE631E Operation Manual

Change picture format
Change the picture format to suit your
preference.
1. Press ADJUST.
2. Select [Picture format], then press OK.
3. Select a picture format, then press OK to
confirm.
The available picture formats depend on the
video source:

[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.

[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.

[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.

[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.

[Wide screen]: Stretch 4:3 format to
16:9.

[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
enabled in the picture menu.

Watch a connected device

Add new device
Notes:

Before you watch a connected device,
you must add its icon to the TV menu.
See Connect your TV > Connect
device (Page 37).

If you connect an HDMI-CEC
compliant device to the TV, it is
automatically added to the TV menu.
1. Connect and switch on the device.
2. Press MENU.
3. Select [Add your devices], then press
OK.
4. Follow the onscreen instructions.

Select your device.

Select the connector.
Note: If you are prompted to select the TV
connection, select the connector that this
device uses.
Select a source
From TV menu
After you have added the new device to the
TV menu, select the new device icon to view
its content.
1. Press MENU.
2. Select the device icon from the TV menu.
3. Press OK to confirm.
From Source menu
You can also press
list of connector names. Select the
connector that connects the device to the
TV.
SOURCE.
1. Press
2. Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
SOURCE to display a
EN 15