Page 2
INITIAL INSPECTION OPERATING ENVIRONMENT TEMPERATURE HUMIDITY VENTILATION HANDLING CONNECTORS STORING AND SHIPPING CLAIMS AND REPACKAGING RETURNING SHIPMENTS TO LUCEO TECHNOLOGIES GMBH LUCEO TECHNOLOGIES GMBHFEHLER! TEXTMARKE NICHT DEFINIE APPENDIX FIGURES OPTICAL SPECTRUM ANALYZER User Manual --- Rev 1.1 --- 2012/11 www.luceotec.com...
Page 3
OPTICAL SPECTRUM ANALYZER User Manual Index of Contents TABLES OPTICAL SPECTRUM ANALYZER User Manual --- Rev 1.1 --- 2012/11 www.luceotec.com...
Page 4
Failure to comply with any of these instructions or with any precaution or warning contained in the user’s manual is in direct violation of the standards of design, manufacture, and intended use of the unit. Luceo Technologies GmbH assumes no liability for the customer’s failure to comply with any of these safety requirements.
Page 5
OPTICAL SPECTRUM ANALYZER User Manual II.) General OPERATING THE UNIT Warning To avoid the risk of injury or death, always observe the following precautions before initializing the unit: Use the Module ONLY in the X-BERT or PARALLEX ® mainframe. ...
Page 6
OPTICAL SPECTRUM ANALYZER User Manual II.) General SAFETY SYMBOLS The following symbols and messages can be marked on the unit (Table 1). Observe all safety instructions that are associated with a symbol. Table 1: Safety Symbols Symbol Description Laser safety. See the user’s manual for instructions on handling and operating the unit safely.
Page 7
OPTICAL SPECTRUM ANALYZER User Manual II.) General GENERAL DESCRIPTION The OPTICAL SPECTRUM ANALYZER module is build for use in the X-BERT mainframe, which has a modular setup depending on the user’s configuration (E-BERT-, O-BERT-, Clock Source-, Clock divider-, CDR-, OPM-, VOA-, OSW-, PHS- module, etc…). The mainframe is controlled via GPIB, USB or LAN.
Page 8
OPTICAL SPECTRUM ANALYZER User Manual II.) General Figure 2: Collection of X-BERT modules OPTICAL SPECTRUM ANALYZER User Manual --- Rev 1.1 --- 2012/11 www.luceotec.com...
Page 9
OPTICAL SPECTRUM ANALYZER User Manual II.) General KEY FEATURES OF THE OPTICAL SPECTRUM ANALYZER MODULE C – Band or L – Band range Cleanable optical connectors Three different versions L-6001-OSA-1 L-6001-OSA-C-1 L-6001-OSA-L-1 1520 nm – 1580 nm –...
Page 10
Keep the packaging. Immediately inform Luceo Technologies GmbH and, if necessary, the carrier if the contents of the shipment is incomplete, if the unit or any of its components are damaged or defective, or if the unit does not pass the initial inspection.
Page 11
The unit does not pass the initial inspection In the event of carrier responsibility, Luceo Technologies GmbH will allow for the repair or replacement of the unit while a claim against the carrier is being processed. RETURNING SHIPMENTS TO LUCEO TECHNOLOGIES GMBH Luceo Technologies GmbH only accepts returns for which an approved Return Material Authorization (RMA) has been issued by Luceo Technologies GmbH sales personnel.
Page 12
OPTICAL SPECTRUM ANALYZER User Manual III.) Installation Use enough shock-absorbing material (10 to 15 cm or 4 to 6 in on all sides) to cushion the unit and prevent it from moving inside the container. Seal the shipping container securely. ...
Page 13
IV.) ABOUT LUCEO LUCEO Technologies GmbH was created by engineers involved in optical transceiver design, who recognized critical gaps in test and measurement equipment for optical component and transceiver characterization. Luceo’s test system is the first to combine a complete BERT test solution with affordable cost and German build quality.
Page 14
OPTICAL SPECTRUM ANALYZER User Manual Appendix APPENDIX FIGURES Figure 1: Typical appearance of the X-BERT Figure 2: Collection of X-BERT modules OPTICAL SPECTRUM ANALYZER User Manual --- Rev 1.1 --- 2012/11 www.luceotec.com...
Need help?
Do you have a question about the PARALLEX SYSTEM X-BERT Series and is the answer not in the manual?
Questions and answers