Page 2
Introduction Model ZM002 is a zigbee module. The wireless communication part of the product is based on ZigBee Compliant Platform ,CustomNodes EFR32MG13P732F512IM32-C technology, which are fully integrated System-on-Chips that integrate a 2.4 GHz, IEEE 802.15.4-2003-compliant transceiver, 32-bit ARM® Cortex™-M4 microprocessor, flash and RAM memory, and peripherals of use to designers of ZigBee-based systems.
Page 3
This Zigbee Module used for lighting device, plug it in the power board, then adding the LED bulb to a zigbee hub or other third-party hubs,you also can connect Sengled Smart hubs according to their instructions in apps to control the LED bulb on/off ,lumens level or colors.
Page 4
FCC/ISED Regulatory notices: Modification statement Sengled Co., Ltd. has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Sengled Co., Ltd. n’approuve aucune modification apportée à...
Page 5
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The host end product must include a user manual that clearly defines operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...
Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003. Installation Guidance The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.