Freestanding 5x Magnifying LED Lamp
J
D
C
E
F
A
I
H
G
K
Please read carefully before use and retain for future reference.
9666
PARTS
A.
L
ower pole
L
B.
Base
C. Flexible neck
D.
L
amp head
L
E. Upper pole
Upper pole
F. Stem cable
G. Mains adapter
H. Collar
I. Lock connector
J. ON/OFF switch
K. DC plug
ASSEMBLY
1. Take the flexible neck(C) and feed the stem cable(F) through
the upper pole(E).
2. Screw the upper pole(E) clockwise into the flexible pole(C).
Take care not to pinch the cable.
3. Feed the stem cable(F) through the lower pole(A).
4. Screw the lower pole(A) clockwise into the upper pole(E).
Take care not to pinch the cable.
5. Connect the two ends of the cable by press the lock
connectors(I) into place.
6. Turn and tighten the metal collar(H) onto the base(B).
7. Carefully feed the excess cable into the lower pole(A).
Do not cut or shorten the cable.
8. Take out the screw and insert the lower pole(A) into
the metal collar(H).
9. Check direction of the lamp head and line up the screw hole
and use a screwdriver to tighten the screw.
10. Connect the DC plugs(K) on the external power cord.
11. Plug adapter into main outlet and turn on the lamp using
the ON/OFF switch(J).
USE
• Hold reading material directly parallel to the magnifier
B
L
lens. If not positioned correctly, the reading material
n
may appear distorted.
• The
L
EDs are specially formulated to simulate the
characteristics of natural sunlight. They are non-
replaceable and should give up to 50,000 hours of use.
• Turn off and unplug the light when not in use.
Instructions