Table of Contents
Advertisement
REMOTE RS-232C
REMOTE IR IN
• These jacks are for receiving the
external control signal. Enables
extended control of the TV using RS-
232C via the RS-232C and IR IN jacks.
RS-232C: connect to the RS-232C
terminal of the home controller.
IR IN: connect to the IR out terminal
of the home controller.
• Take care to not connect to
headphones or an external audio
system.
/ VIDEO IN
• For a composite connection, use an
Analog Extension Cable (not
supplied).
•
3.5 mm
1: L
2: Video
3: Ground
4: R
(Headphone)
• Supports 3-pole stereo mini jack only.
• You cannot output sound from both
the headphone and the TV speakers
at the same time.
USB 1/2,
• Connecting a large USB device may
interfere with other connected
devices beside it.
• When connecting a large USB device,
connect to the USB 1 port.
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
• When connecting an 8K supported
device, connect to the HDMI IN 4
terminal.
•
< 12 mm
< 21 mm
16
US
1 2 3 4
USB 3
• To enjoy high quality 4K 60p
contents, connect a Premium High
Speed HDMI cable and set the [HDMI
signal format] to Enhanced format.
Do this setting individually for each
connected HDMI IN terminal. For
details of supported formats, refer to
the "Specifications" in this manual
(page 22-23).
• HDMI IN 3 eARC/ARC (Enhanced
Audio Return Channel/ Audio
Return Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your
audio system. An audio system that
supports HDMI eARC/ARC can send
video to the TV, and receive audio
from the TV via the same HDMI cable.
If your audio system does not support
HDMI eARC/ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
• Use the HDMI cable with Ethernet to
connect audio system with eARC.
CENTER SPEAKER IN
• To use your TV speakers as the center
speaker, connect the output of your
AV receiver to the CENTER SPEAKER IN
on your TV.
• Before connecting cables, disconnect
the AC power cord of both TV and AV
receiver.
• Make sure the [Speakers] is set to
[Audio system].
10 mm
To prevent hiss when not connecting
the CENTER SPEAKER IN to an AV
receiver, disable [TV center speaker
mode]. For details, refer to the Help
Guide.
Advertisement
Table of Contents
