Micon Ezee Glow Wee Hugo Owner's Manual

Micon Ezee Glow Wee Hugo Owner's Manual

Advertisement

Quick Links

Ezee Glow Wee Hugo
Model Number - MZEWHES
OWNER'S MANUAL
Installation & User Instructions
This product is only suitable for well insulated spaces and occasional use.
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ezee Glow Wee Hugo and is the answer not in the manual?

Questions and answers

Summary of Contents for Micon Ezee Glow Wee Hugo

  • Page 1 Ezee Glow Wee Hugo Model Number - MZEWHES OWNER’S MANUAL Installation & User Instructions This product is only suitable for well insulated spaces and occasional use. IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.
  • Page 2 SAFETY INSTRUCTIONS  Please read all instructions carefully before using this appliance.  This heater must be used on an AC supply only and the voltage marked on the heater must correspond to the supply voltage.  Do not switch the appliance on until it’s properly installed as described in this manual. ...
  • Page 3 PLACEMENT This heater is designed to be placed on a hard, level surface. When positioning, please keep the following points in mind: • If you are placing the heater in an alcove, make sure that there is at least 150mm of space on all sides to ensure good air circulation.
  • Page 4 OPERATION INSTRUCTIONS • Insert plug into mains socket • Open the front door. • Select the desired functions: Flame/fuel effect on/off (3) Low heat setting 900W (3 + 4) High heat setting 1800W (3 + 4+ 5) Heating and Flame effect (1 + 2 + 3 + 4 + 5) •...
  • Page 5 [no] open window detection with distance control option [no] with adaptive start control [no] with working time limitation [no] with black bulb sensor [no] Contact details Micon Distribution Ltd. 1a Hallstown Road, Ballinderry Upper, Lisburn BT28 2NE...
  • Page 6 · If a 13A (BS1363) fused plug is used it must be fitted with a BS1362 13A fuse. If in doubt consult a qualified electrician. Manufacturers name: Micon Distribution Ltd. Manufacturers address: 1a Hallstown Road, Ballinderry Upper, Lisburn, BT28 2NE...
  • Page 7 Should you require after sales information or warranty assistance within UK & Ireland with this product please go to https://www.micon-dist.com/. Imported and Distributed by Micon Distribution Ltd.1a Hallstown Road, Ballinderry Upper, Lisburn BT28 2NE. Ezee Glow Brand is exclusively owned by Micon.

This manual is also suitable for:

Mzewhes

Table of Contents