Do you have a question about the DEKO500 and is the answer not in the manual?
Questions and answers
Summary of Contents for Pinnacle Systems DEKO500
Page 1
Quick Install PPN 253000-QSMAN MENU OUTPUTS DIGITAL I/O OUTPUT SVGA VIDEO INPUT MOUSE A / VIDEO B / KEY NETWORK REF-LOOP 1) Captive Screws 6) Rear Connector Panel 11) Reference Loop 2) Air Vents 7) AC Power In 12) Digital Video Output 3) SVGA Menu Output 8) Mouse 13) Video Input...
Page 2
• Connect an analog reference signal from your house sync generator to the left-hand Reference connector (11). • If Deko500 is the last device in your reference loop, terminate the right-hand Reference connector with a 75 Ω terminator. • If Deko500 is in the middle of your reference loop, connect the right-hand Reference connector to the next device’s reference input connector.
Page 3
For Component, E, F and G. • Connect analog key and video outputs to output BNCs. Key signal out connects to D Composite video, A Y/C, B and C Component, A, B and C. Deko500 Quick Install Page 3 of 4...
Page 4
The green Power LED (below the switch) lights when the system is on. The system boots up and prompts you to log on. • Log on to Windows NT as user “Deko500” with blank password. • Double-click the Deko icon to launch Deko500 8.
Need help?
Do you have a question about the DEKO500 and is the answer not in the manual?
Questions and answers