Advertisement
Quick Links
Advertisement
Summary of Contents for Ashly AW Series
- Page 1 Operating and Installation Manual AW 2.1P 2-inch wall-mount speakers AW 2.1P AW 3.2P AW 3.2P 3-inch 2-way wall-mount AW 2.1 P / AW 3.2P speakers mounting bracket AW 5.2T AW 8.2T 5-inch 2-way wall-mount speakers AW 5.2T AW 5.2T 8-inch 2-way wall-mount speakers AW 8.2T / AW 5.2T mounting bracket...
- Page 2 Don’t unplug signal cables when the amp For AW 3.2P, 5.2T and 8.2T, make sure that certified by a local inspector. connected to your AW Series speakers is still the safety cable is securely attached. Do not install near any heat sources such...
-
Page 3: Table Of Contents
AW Series wall-mount speaker Operating Manual Thank you for choosing Ashly AW Series wall- AW Series mount speakers (and hopefully our matching subwoofer). We know that there are many 4-sizes from 2” to 8” ■ choices on the market today; so we have worked... -
Page 4: Back Panel Connections
AW Series wall-mount speaker Operating Manual Back Panel Connections AW 2.1P and AW 3.2P have basic 2-pole Euroblock connections. AW 2.1P are 6 Ω impedance; AW 3.2P are 8 Ω. AW 2.1P and AW 5.2T and AS 8.2T have two parallel sets of Euroblock inputs. -
Page 5: Typical Aw 2.1 Or Aw 3.2P Connections
AW Series wall-mount speaker Operating Manual Typical AW 2.1 or AW 3.2P Connections AW 2.1Ps are 6 Ω impedance. If using a 2-ohm-rated amplifier, two AW-2.1Ps may be connected per channel. AW 3.2Ps are 8 Ω impedance. If using four AW 3.2Ps in parallel per amp channel, confirm that the amplifier is capable of 2 Ω... -
Page 6: Aw 5.2T Or Aw 8.2T Connections
AW Series wall-mount speaker Operating Manual AW 5.2T or AW 8.2T Connections Standard transformer-coupled, Constant Voltage connection. Please note that when using these models set to 8 ohms, the same conditions should be applied as with the AW-3.2P, except that more power may be used per speaker. -
Page 7: Ashly Aquacontrol™ And Protēa™ Software Presets For Aw Speakers
20 dB 20 dB 9 dB 9 dB AW Speakers Frequency response and crossover points of AW Series speakers can be Typical 2-way loudspeaker Ashly 2-way speaker with DOC* crossover and DSP enhanced when used in conjunction with: Universal •... -
Page 8: Aw Series Mounting Brackets
AW Series wall-mount speaker Operating Manual AW Series Mounting AW 2.1P & Brackets. AW 3.2P bracket Separately configured tilt-swivel (dual-angle) brackets are included for the AW 2.1P / AW 3.2P Secure the AW 5.2T / 8.2T. bracket to Safety tether AW 3.2P with... -
Page 9: Aw 5.2T & Aw 8.2T Bracket
AW Series wall-mount speaker Operating Manual AW 5.2T & AW 8.2T bracket M4 x 12 screws Secure bracket to AW 5.2T or WA 8.2T with correct bracket- safety tether, to-wall fasteners using M4 x 8 screws! M4 x 12 screws... -
Page 10: Aw Series Specifications
AW Series wall-mount speaker Operating Manual AW Series Specifications AW 2.1P AW 3.2P AW 5.2T AW 8.2T Speaker Type Passive, Full-range Passive, 2-Way Passive, 2-Way Passive, 2-Way 165 Hz~19 KHz 100 Hz~19 KHz 79 Hz~19 KHz 65 Hz~19 KHz Frequency Response... - Page 11 US toll-free +1.585.872.0010 Fax +1.585.872.0739 Sales@Ashly.com AW 5.2T www.Ashly.com Questions? Install problems? We think that Ashly Technical Support is the best in the pro audio business. Just call us (8 AM-5PM Eastern time zone) or e-mail us. US toll-free +1.585.872.0010 Support@ Ashly.com...
Need help?
Do you have a question about the AW Series and is the answer not in the manual?
Questions and answers