Advertisement
Quick Links
Atelier Finials
Finials - 1 ⅛"
Thank you for purchasing your new decorative finials. With proper
installation and care, they will provide you with many years of beauty
and trouble-free use. Clean with a soft cloth. Do not use harsh or
abrasive cleaning supplies or polishes which may damage the finish.
Components included for each Finial:
• Plastic Plug (comes attached to finial).
FM118PL
NOTE: The plastic plug is designed to lock in to the pole, ensuring
the finial is secularly attached.
If a finial needs to be removed after it is installed on a pole,
a new plastic plug must be used to insure proper attachment.
It is highly recommended that extra plastic plugs are
purchased in the event a finial needs to be removed.
Components included for each H-Rail Finial:
• Allen Wrench & extra set screw included.
• H-Rail Mount (requires removal of plastic plug to access).
Allen Wrench
Extra Set Screw
Finial Installation for Pole Mount:
1. Install all hardware and pole.
AriAMetalHardware.com
2. Locate the finial. Check the finial plastic plug to ensure it is
3. Finial orientation should be determined before attaching to pole.
4. Align the plastic plug parallel to the pole.
5. Insert the plastic plug into the pole, while keeping the plastic
6. To complete installation push the finial until it contacts the pole.
Finial Removal Instructions:
1. To remove the finial, pull the finial straight out of the rod
2. Keep the finial parallel to the pole during removal to prevent
H-Rail Finial Mount
3. Push finial down until it breaks free of the plastic plug.
© 2019 Rowley
®
Company, LLC. All rights reserved. AriA
securely attached to finial.
NOTE: If the plastic plug is loose, tighten the plastic plug with a
Phillips screw driver.
plug parallel to the pole, and the finial in the correct orientation.
(Hold the finial in the desired orientation during this step).
without twisting.
damaging the plug. If the plug is damaged, continue to step 3.
®
is a registered trademark of Rowley
REV April 25, 2019
1
®
Company, LLC.
Advertisement
Related Manuals for Aria Atelier FM600 Series
Summary of Contents for Aria Atelier FM600 Series
- Page 1 Finial Installation for Pole Mount: 3. Push finial down until it breaks free of the plastic plug. 1. Install all hardware and pole. AriAMetalHardware.com © 2019 Rowley ® Company, LLC. All rights reserved. AriA ® is a registered trademark of Rowley ® Company, LLC.
- Page 2 9. To complete your finial installation, tighten the set screw. 2. Locate the finial. 3. Remove the plastic plug by loosening the set screw. AriAMetalHardware.com © 2019 Rowley Company, LLC. All rights reserved. AriA is a registered trademark of Rowley Company, LLC. ® ®...
Need help?
Do you have a question about the Atelier FM600 Series and is the answer not in the manual?
Questions and answers