(depending on the standard the workshop is working to) it should be tested 3, 6 or 12 months after the start of use date (purchase receipt date). Register your Laser Tools torque wrench at: https://www.lasertools.co.uk/product-registration You will be asked to provide contact details, the serial number of the product, where...
Page 3
Introduction We would like to thank you for purchasing this Laser Tools torque wrench and hope it gives you many years of service. These new digital torque ratchets are designed to secure fasteners that need to be tightened to lower torque figures and when therefore over-tightening is a real risk.
Page 4
Instructions Refer to Controls diagram on page 3. How to select the unit measurement scale: 1. Press Memory (J) and Peak/Trace (I) buttons together. 2. Release to select different torque measurement scales (Nm | ft/lb | in/lb | Kg/m). 3. The unit value will automatically change when the measurement scale is selected. How to select torque settings and use the torque wrench: 1.
Turning Off: 1. If you do not use the wrench for 70 seconds the tool will turn off automatically. 2. To manually turn off the wrench press the On/Off button (F) button and hold for approximately 3 seconds. 3. The next time the torque wrench is switch on, the last used manually set torque figure will be remembered.
Maintenance • Always ensure your torque wrench is maintained in a dry, clean environment. • Store the torque wrench in the case in which it was provided. • Use a soft cloth to clean the tool and the display. Reasons for Torque Wrench Malfunction •...
Warranty If your torque wrench should fail or you suspect the calibration is out during the 12 months warranty period please contact our Service Deptartment to arrange for the return. If the torque wrench is found to be faulty an alternative will be offered or a discounted rate may be offered if there is any sign of misuse.