Specification - EBCHQ YQK Series Instruction Manual

UNDERSTAND YOUR TOOL
YQK series are the tools for connecting lugs and cable. It carries many advantages of good
design, easy operation, high pressure, high efficiency etc. They are the perfect tool to be
used in electric construction site.
1． Specification
Item YQK-240
Crimping range: Cu 16-240mm
Crimping force: 100KN
Crimping type: hexagon crimping
Stroke: 22mm
Length: approx 480mm
Weight: approx3.60kg
Package: plastic box
Weight of box: approx1.20kg
Accessories
crimping die 16.25.35.50.70.95.120.150.
185.240 mm
Sealing O-ring: one set
YQK-300
2 2
Cu 10-300mm
100KN
hexagon crimping
22mm
approx 500mm
approx3.60kg
plastic box
approx1.20kg
10.16.25.35.50.70.95.120.1
2
50.185.240.300 mm
one set
Please wear the rubber gloves to avoid skin touching the oil directly, if touches it
in careless, please wash the
the environment please drain the waste oil
approved by government.
TROUBLESHOOTING
FAULT
A. No pressure or the
pressure is not enough
during operation
B. The lug and wire do
not connect
after crimping.
C. Generate a lot of
2
burs after crimping
D. Oil leakage on the
head or on the ram
The dust or air inside the tool will damage the sealing kit so caused the
tool lose function. Make sure the oil is clear and no dust entering into
oil when changing oil. Wait for a while and exhaust the oil completely
out of the oil tube before inserting the oil plug.
skin by soap water in timely. In order to protect
ANALYSIS
1. The pump lack oil
2. There is dust exist in oil
3. Inner leakage
1. The tool can not reach
tightly to the rated pressure
2. Use the wrong die
1. Use the wrong die
1. Sealing kit broken
to the treatment center where was
SOLUTION
1. Fulfill or replace the oil
2. Change the oil
3. Contact manufacturer or
distributor
1. Refer to the fault A
2. Replace with the right
die
1. Replace with the right die
1. Contact manufacturer or
distributor and replace it by
trained person