Follow These Steps When Battery Is Outside Vehicle; Grounding And Ac Power Cord Connections; Using An Extension Cord - Blue point EEBC100A Manual

7. FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE

A SPARK NEAR THE BATTERY MAY CAUSE A
BATTERY EXPLOSION. TO REDUCE THE RISK OF A
SPARK NEAR THE BATTERY:
7.1 Check polarity of battery posts. POSITIVE (POS, P,
+) battery post usually has a larger diameter than
NEGATIVE (NEG, N, –) post.
7.2 Attach at least a 24-inch-long 6-gauge (AWG) insulated
battery cable to NEGATIVE (NEG, N, –) battery post.

8. GROUNDING AND AC POWER CORD CONNECTIONS

RISK OF ELECTRIC SHOCK AND FIRE.
8.1 This battery charger is for use on a nominal 120 volt
circuit and has a grounded plug. The charger must be
grounded, to reduce the risk of electric shock. The plug
must be plugged into an outlet that is properly installed
and grounded in accordance with all local codes and
ordinances. The plug pins must fit the receptacle
(outlet). Do not use with an ungrounded system.
8.2 Never alter the AC cord or plug provided – if it does not
fit the outlet, have a proper grounded outlet installed
by a qualified electrician. An improper connection can
result in a risk of an electric shock or electrocution.
EEBC100A-Z
7.3 Connect POSITIVE (RED) charger clip to POSITIVE
(POS, P, +) post of battery.
7.4 Position yourself and free end of cable as far away from
battery as possible – then connect NEGATIVE (BLACK)
charger clip to free end of cable.
7.5 Do not face battery when making final connection.
7.6 When disconnecting charger, always do so in reverse
sequence of connecting procedure and break first
connection while as far away from battery as practical.
7.7 A marine (boat) battery must be removed and charged
on shore. To charge it on board requires equipment
specially designed for marine use.
8.3
NOTE: Pursuant to Canadian Regulations, use of
an adapter plug is not allowed in Canada. Use of an
adapter plug in the United States is not recommended
and should not be used.
8.4

USING AN EXTENSION CORD

The use of an extension cord is not recommended.
If you must use an extension cord, follow these
guidelines:
• Pins on plug of extension cord must be the same
number, size, and shape as those of plug on charger.
• Ensure that the extension cord is properly wired and
in good electrical condition.
• Wire size must be large enough for the AC ampere
rating of charger, as specified:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
6
• •
25 50 100 150
14 12 8 8