Skin for life Pure O2 Manual

Setup
INSTRUCTIONS:
service@skinforlife.com • (866) 312.7546
Cord Placement
• Power Input is in the back of
• Insert adapter in the back at
• Cord - DC power adapter
End of black hose. Insert
On/Off Switch
into the front tube fitting
for O2 Gun
Two Buttons
• LED light on/off switch only
• O2 on/off switch only
Thread silver
adapter to base
of oxygen gun
Pure O2 Portable Machine
Placement
Back View
Hand Pieces
• The white cord from the LED
the machine
the base of the machine
has a 2 prong plug.
Attachment
• Thread silver hose adapter to
• Insert the black hose firmly
powers the LED light hand
pieces
• When removing black hose
powers airbrush for
dispersing oxygen
Guidelines
LED light
light hand pieces have a
5 pin "Din Plug." View the
LED socket to guide you for
perfect alignment before
inserting the plug into the LED
socket
Airbrush
the base of the oxygen gun
into the front of the machine
into the black fitting.
use index finger and thumb
to press down on the ring of
black fitting and pull hose to
remove
F622019 Rev.2