Table of Contents
Advertisement
Quick Links
Gutter Hood Tools & Accessories
New Construction and Retrofit
Includes 5" & 6" Gutter Installations
Trim-A-Gutter
Model TAG50
™
Shown with Metal Master
20 Brake & UniStand
®
Tool Support (each sold separately)
Trim-A-Gutter
Shown with Mark II
Tool Supports (each sold separately)
Trim-A-Gutter
Shown with UniLegs™ UNL1 (sold separately)
™
Model TAG50
™
™
TrimMaster
®
Brake & UniLeg
™
Tool Setup, Bending Brakes.............................2
Tool Setup, Metal Master
Forming Gutter-Hood........................................4
Existing Gutter Installation................................5
Forming End-Caps, Miters, & Valleys...............6
Template...........................................................6
New Gutter Installation.....................................6
Example Profiles/Uses......................................7
™
Model TAG50
Care & Maintenance.........................................7
Parts List..........................................................8
Patent No's. 7,500,375 7,707,781 Canada Patent No. 2,598,976
Save This Guide
For Reference!
Table of Contents
20...........................3
®
...............................4
™
Price $10.00 US
Advertisement
Table of Contents
Summary of Contents for Van Mark Trim-A-Gutter TAG50
- Page 1 Gutter Hood Tools & Accessories New Construction and Retrofit Includes 5" & 6" Gutter Installations Trim-A-Gutter Model TAG50 ™ Shown with Metal Master 20 Brake & UniStand ® ™ Tool Support (each sold separately) Trim-A-Gutter Model TAG50 ™ Shown with Mark II ™...
- Page 2 Setup Note: Determine the type of Van Mark brake you use and follow the instructions in that column to mount your new tool. For all other brakes you must purchase a set of UniLegs and follow steps 1-6 “Tool Setup on UniLegs” at the bottom half of page 3.
- Page 3 2 ” 1 1 / Track with front hole in bracket K. Insert 2 or 3 turns onto the threads of a hex head screw C. Place rail alongside right bracket with 5/16” hole to front Align front hole in rail Start knob of brake.
- Page 4 Extended Bracket Side View Leg Flare Rail Assembly Detail G Detail H Lay out rails as shown with screw tracks facing up. Insert From opposite end of rails, again insert the hex head portion Position a UniLeg ™ at each end of rail assembly with the ex- the hex head portion of screw into each track (see Detail of screw...
- Page 5 he following instructions are to be used as a guideline on getting up and running with Trim-A-Gutter Tools and Hardware. Before getting started, it is recommended that you check the ™ entire gutter system for problems, such as clogged downspouts, leaks or rotted wood, before installing gutter-hood. Use these guidelines for installing new 6" brackets as well. Check end caps, outlets and seams for water-tightness.
- Page 6 *To download a splash or end-cap template, go to www. van-mark.com and navigate to the Trim-A-Gutter Instal- ™ lation page. Scroll down and click either the splash or end-cap image. ption 1. Install gutter-hood 2-3 inches past end of gutter. Cut away the nose ption 2.
- Page 7 5. Unlock & slide out approx. 3.5 to 4". (to achieve 5" bracket span). Bend 90°. Your new Van Mark tool has been calibrated and adjusted at the factory and is ready to go. Follow these steps for optimum performance and installation of gutter-hood.
- Page 8 Trim-A-Gutter ™ Parts List Effective 12-15-14 For Quick “Same Day Shipment” Order Early Order Toll-Free 24 Hrs Call Free 1-800 Van Mark Fax Free 1-888 Van Mark Description Part No Description Part No Description Part No End Block Screw 2067...
Need help?
Do you have a question about the Trim-A-Gutter TAG50 and is the answer not in the manual?
Questions and answers