Seg VC 828E Instruction Manual page 60

1. Before the first use the device must be fully charged via
the delivered USB charging cable (10) and a USB adapter
(not included in content).
2. Connect the device with the USB charging cable (10) via
the charging port (9).
3. Connect the USB charging cable (10) with an USB adapter
(not included in content) and connect to the power supply.
4. The device starts the charging process.
5. A running light in the LED charging indicator (5) indicates
the charging process.
6. If using an USB adapter of the type DC5V 2A (not included
in content) the charging process takes approx. 2.5 hours.
7. Once the LED charging indicator (5) shows 3 permanent
lights it indicates that the device is fully charged.
8. Disconnect the device from the power supply.
9. Once fully charged the device can be operated for
approx.17 minutes.
10. The LED charging indicator (5) shows the charging level.
As soon as the light blinks during low charging level, the
device must be charged.
60
Charging level: high
Charging level: medium
08/2020