Related Manuals for Champion instruments PRO
Summary of Contents for Champion instruments PRO
- Page 1 Champion PRO Web Interface Step Action Display Power On Champion Pro On your Smart Phone Go To Settings Open WiFi Connections and Select GNSS-Your Serial Number Champion Instruments 770.234.3254 | www.championinstruments.com Page 1/6...
- Page 2 Champion PRO Web Interface Step Action Display To Connect to WiFi Enter Password Screen should display a message telling you the Internet may be available Close Connections and Open Internet Browser. Enter IP Address 192.168.1.1 Champion Instruments 770.234.3254 | www.championinstruments.com...
- Page 3 Champion PRO Web Interface Step Action Display You should See This Screen asking for LogIn Account And Password LogIn Account = admin Password = password Check Remember Me if you wish to not enter UN and PW each time You should now be taken to the screen...
- Page 4 Champion PRO Web Interface Step Action Display You can now check Status for Position and Activity if so desired You can also access the SkyPlot of Satellites being Tracked To Run a Static Session, First Go To Satellites, Satellite Activation Champion Instruments 770.234.3254 | www.championinstruments.com...
- Page 5 Champion PRO Web Interface Step Action Display Turn Off BDS and Galileo by moving the slide to the left. This will disable the Beidou and Galileo for recording of Static Observations Next Go To static Recording Move the Slides to the Right to Start the Receiver in Static Mode.
- Page 6 Champion PRO Web Interface Step Action Display You can name your project and set your antenna height in the receiver You can also change the Epoch Interval and Elevation Mask End Static Recording, Move the Slides to the Left, or Power down the Receiver.