AEG KA 6 Instructions For Use Manual page 15

Fire hazard!
• Be sure the supply voltage
matches the input voltage
specified on the device
(100-240 VAC) to prevent
damage to the device.
• The device is not suit-
able for continuous use.
otherwise overheating and
permanent damage may
result.
Do not cover the device
•
during use, as it may be
damaged from extreme
heating.
Immediately stop using the
•
device if you notice smoke
or an unusual odour.
Risk of electrical
shock!
• Do not expose the product
to rain or moist conditions.
Avoid spilling or dripping
water or other liquids on
it. Water entering electrical
devices will increase the
risk of electric shock.
• Ensure that all plugs and
cables are free of moisture.
Never connect the device
to the mains with wet or
moist hands.
Do not use device if
•
damaged. Damage to the
device or the charging
cable increases the risk of
electrical shock.
• Do not attempt to dis-
assemble or repair the
device. Immediately have
the device repaired or re-
placed by a speciality shop
if defective.
• always unplug device by
the plug. the cable may be
damaged.
• Never use the cable to
carry or pull the device.
• Route the power cable so
it does not pose a tripping
hazard and to prevent
cable damage.
English 15